User's Manual



Store

To store the adjusted data, select Store and

thenpressthePoint►buttonortheSELECT

button. Move the highlight to one of the Mode

1 to 10 in which you want to store, and then

press the SELECT button.



To clear the stored data, select  and

thenpressthePoint►buttonortheSELECT

button. Move the highlight to the Mode that

you want to clear and then press the SELECT

button.



 • cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the

PC System Menu (p.28).

 • Wheninputcomputersignaltotheprojector, PC adjust will become available.



To reset the adjusted data, select  and

press the SELECT button. A confirmation box

appears and then select . All adjustments

will return to their previous figures.

This Mode has stored

parameters.

Values of , ,

Vertical, , and 

area V.

Vacant

Press the SELECT

button to store the data.

Press the MENU

button to close this

dialog box.



Store