User's Manual
29
Auto PC Adjustment function is provided to automatically adjust , ,
and Vertical to conform to your computer.
PC adjust Menu
Auto PC Adjustment
The adjusted parameters from the Auto PC
Adjustment can be stored in the projector.
Once the parameters are stored, the setting
can be done just by selecting a in
the PC System Menu (p.28). See also “Store”
on page 31.
• , , and Vertical of
some computers cannot be fully adjusted with the
Auto PC Adjustment function. When the image is
not provided properly with this operation, manual
adjustments are required (pp. 30-31).
• TheAutoPCAdjustmentcannotbeoperatedwhen
480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu (p. 28), or when
the signal is coming from the HDMI terminal.
Press the MENU button to display the
On-ScreenMenu.UsethePoint▲▼
buttons to select PC adjust and then press
the Point ►button or the SELECT button.
1
2
UsethePoint▲▼buttonstoselectAuto
PC adj. and then press the SELECT button.
Auto PC adj.
Menu Operation
UsePoint▲▼buttonstoselect Auto
PC adj. and press the SELECT button.
Please wait... appears while the Auto
PC adjustment is in process.