User's Manual
Basic Operation
27
Choose either or by pressing the COMPUTER 1 or
COMPUTER 2 button on the remote control. Or you can press the INPUT button on the top control to
choose the desired input source.
Before using these buttons, correct input source should be selected through Menu operation as
described below.
1
2
3
When the Input search function is set to On 1 or
On 2 in the Auto setup function, the input signal
will be searched automatically (p.45).
Computer 1
Press the MENU button to display the
On-ScreenMenu.UsethePoint▲▼
buttons to select and then press the
Point ►button or the SELECT button.
UsethePoint▲▼buttonstoselect
Computer 1.
When Computer 1 is selected, press the
Point ►buttonto access the submenu
items.UsethePoint▲▼buttonstoselect
the input source and then press the
SELECT button.
Direct Operation
Menu Operation
UsethePoint▲▼buttonstoselect
Computer 2 and then press the SELECT
button.