User's Manual

Setting
59

The Information Menu is used for checking the status of the image signal being projected and the
operation of the projector.


Lamp counter

The horizontal frequency of the input signal is
displayed in , or - - - - when no signal.
The vertical frequency of the input signal is
displayed in , or when no signal.
The cumulative lamp operating time is displayed.


Press the Point ▲▼ buttons to select the
Information. The Information Menu is displayed.
See below for displayed information.
Power management
Screen
, ,   are displayed.
The selected Screen size is displayed.

Lamp status
The selected input source is displayed.
The selected lamp mode is displayed.
Language
The selected language is displayed.

The selected Key lock icon is displayed.

 or On 1 or On 2 is displayed.

The selected remote code is displayed.
Direct Operation
Menu Operation

The serial number of the projector is displayed.
The serial number is used to service the
projector.


The saved amount of power and the exhausted
CO2 are displayed.
The information menu changes each time you
press the INFO. button on the remote controller
as follows.
page 1/2  page 2/2  hide  page 1/2 
••••
While the information menu is displayed, press
the Point ◄ ► buttons to display the previous or
next page.