User's Manual
56
Setting
Use the Point ▲▼ buttons to select , On 1
or On 2, and then press the SELECT button to
make a choice.
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄ ► buttons to fix the number
and move the red frame pointer to the next box.
The number changes to . If you fixed an incorrect
number, use the Point ◄ ► buttons to move the
pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to Set. Press the SELECT button so that
you can change the following PIN code lock
setting.
If you entered an incorrect PIN code,
and the number () will turn red for a
moment. Enter the correct PIN code all over again.
The PIN code can be changed to your desired
four-digit number. Press the SELECT button to
select . Pin code dialog box
appears, use the Point ▲▼ buttons to enter the
current code. The New PIN code input dialog box
appears. Set a new PIN code.
This function provides the following options in
the cooling fans’ operation when the projector is
turned off (p.20).
L 1 .... Higher-sound than L 2 mode and it takes
less time to cool the projector down.
L 2 .... Slower and lower-sound than L 1 mode,
but it takes more time to cool the projector
down.
Fan