User's Manual

38
Choose Video or S-video by pressing the INPUT button on
the top control, or the VIDEO button or the S-VIDEO button
on the remote control.
Before using INPUT button, correct input source should be
selected through menu operation as described below.
1
2
Input Menu
Input Source Selection (Video, S-video)
Video Input
When video input signal is connected to the
VIDEO jack, select Video.
Video
When video input signal is connected to the
S-VIDEO jack, select S-video.
S-video
 Note:
  •WhentheInputSearchfunctionis set to On1 or On2
in the Auto setup function, the input signal will be
searched automatically (p.47).
Top Control
Remote Control
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼ buttons to select Input and
then press the Point
►
or the SELECT button.
Use the Point
▲▼
buttons to select either Video or
S-video and then press the SELECT button.
S-VIDEO button
Video
S-video
Direct Operation
Menu Operation
INPUT button
Video
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
S-video
Computer 1(RGB) /
(Component) / (Scart)