Setting Fan L1 L2 (L1 Fan control Fan Control Setting Off Off On 1 On 2 On 3 On 3 Note: On1 On2 On1 On2 On3 On3 L2 Lamp counter Fig.
Setting Filter counter Filter counter Reset Fig.
Information Input Source Information Display Direct Operation Remote Control INFO. button Menu Operation Information Input Information Menu H-sync freq. KHz ----- V-sync freq.
Maintenance and Cleaning WARNING indicator The projector is shut down and the WARNING indicator is blinking red. Top Control Note: Then check the matters below: The projector is shut down and the WARNING indicator lights red.
Maintenance and Cleaning Cleaning the Filters 1 2 3 4 CAUTION RECOMMENDATION We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.
Maintenance and Cleaning Attaching the Lens Cap 1 2 Cleaning the Projection Lens Cleaning the Projector Cabinet 66
Maintenance and Cleaning Lamp Replacement Top Control LAMP REPLACE indicator WARNING: Note: Off CAUTION CAUTION 1 2 3 4 5 6 Reset the lamp counter. ORDER REPLACEMENT LAMP Model No. of your projector Replacement Lamp Type No. : PLC-WXU700 : POA-LMP111 (Service Parts No.
Maintenance and Cleaning Resetting the Lamp Counter 1 Setting 2 Lamp counter Lamp counter reset Lamp counter Reset? Yes 3 Yes Lamp counter Reset? Yes Note: Yes LAMP HANDLING PRECAUTIONS IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
Appendix No image No sound The color is strange. Blackboard Some displays are not seen during the operation. Auto PC adjustment function does not work. 480p, 575p, 720p, 480i, 575i, 1035i The setting does not remain after turning off power. 1080i Store Power management does not work. Capture function does not work. Auto setup does not work properly. Off On Auto keystone function does not work even when the projector is tipped.
Appendix The image is distorted or runs off. PIN code dialog box appears at start-up. 1234" Page Up/Down function does not work. The Remote Control does not work. ON Indicator blinks or lights. Wireless Mouse function does not work. The exclamation mark appears on the screen. Top control does not work. Key lock Security Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock.
Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet.
Appendix Menu Tree Computer Input/HDMI Input/Video Input Input Sound Sound Computer Input Image Select System Image Adjust PC adjust User Screen – 73
Appendix HDMI Input / Video Input Setting Setting System System User Image Select Image Adjust User Screen Information 74
Appendix Indicators and Projector Condition Indicators Projector Condition red/green red yellow 75
Appendix Compatible Computer Specifications ON-SCREEN DISPLAY 76 RESOLUTION H-Freq. (KHz) V-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) V-Freq.
Appendix ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) V-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) V-Freq.
Appendix List of Picture in Picture Note: X 78
Appendix Technical Specifications Mechanical Information Panel Resolution Signal Compatibility Optical Information Interface Audio Power Operating Environment Remote Control 79
Appendix Accessories Optional Parts COMPONENT~VGA Cable : SCART~VGA Cable : VGA-Cable (10 m) : 80
Appendix PJ Link Notice 81
Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 1 2 3 4 5 6 7 8 HDMI (19 Pin Type A) USB CONNECTOR (Series B) 1 2 3 4 LAN TERMINAL 1 2 3 4 82 5 6 7 8 9 10 11 12 13 14 15
Appendix PIN Code Number Memo PIN Code Lock No. Logo PIN Code Lock No.
Appendix Dimensions 84
SANYO Electric Co., Ltd.
