Specifications

6
7. Use of each component
(The following is SYM 4 stroke liquid cooling scooter’s basic operation, and they could vary from different
individual models. Please consult the end of this manual.)
GAUGES
CAUTION :
• Before battery installation, please do not use the kick starter to start the engine, in prevention.
• Not to have trouble on electrical meter working, or damage the electrical meter.
• Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such.
• As gasoline…etc. to avoid damaging these components.
 Speedometer:
This shows your speed in kilometers per hour (km/h)
and in mileage per hour (mph).
 Odometer:
This odometer shows the total kilometers this motor has been driven.
Total kilometer : This shows the total kilometers of this scooter. It shows six digits; 5 in kilometers and 1 in
hundred meter. (The total kilometer will return to zero if it runs over 100,000 kilometers.)
Trip kilometer : The rider can measure the trip kilometers. It shows four digits; 3 in kilometers and 1 in
hundred meter. (The trip kilometer will return to zero if its measurement is over 1,000
kilometers.)
 Turn Signal Indicator:
The left or right Indicator will be flashing according to the operated directions of turn signal
light switch when it is turned on.
 Fuel Gauge:
The pointer in this gauge shows how much fuel remains in the tank.
The pointer stays in “E” position when key switch is turned to “OFF.”
When key switch is turned to “ON”, and the “pointer” also in “E” position (red area).Refuel immediately.
Engine Coolant
Temperature
High Beam Indicator
Turn Signal
Indicator
Turn Signal
Indicator
Odometer
Speedometer
Fuel Indicator
Foggy Indicator
(If installed)
tachometer
Engine Oil Charge
Storage box Indicator
Side Stand Down
Indicator
EFi Indicator
ABS
Indicator
(If installed)
Clock / Voltage
“M” Button
“S” Button