Owner's Manual
Quality Changes the World Quality Changes the World
SPC250 TRUCK CRANE
OPERATION CONDITION
SPC250 TRUCK CRANE
LOAD CHART
10 11
SPC250 Working radius-lifting height curve
0°
15°
30°
31.5+8m
31.5m
27.24m
22.99m
18.73m
14.48m
10.22m
5
3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
10
15
20
25
30
35
40
44
Radius (m)
Lifting height (m)
Prerequisites:
①
Boom operating condition(fully extended boom length),min.length is 10.22 and.max.length is 31.5m
②
The span of outrigger is 5.45×6.2m
③
240°rotation is applied
④
Counterweight is 1.6T
Working range(m)
Main boom
Working range(m)
10.22 14.48 18.73 22.99 27.24 31.5
3 25000 16000
3
3.5 23000 16000 13700
3.5
4 21000 15500 13500
4
4.5 19000 15500 13300 10500
4.5
5 17000 15000 13100 10000 8500
5
5.5 15000 14000 12500 10000 8500
5.5
6 13200 13000 11600 9400 8000 6500 6
6.5 11500 11800 11000 8800 8000 6400 6.5
7 10000 10000 10000 8200 7500 6300 7
8 7500 7800 8000 7500 7000 5900 8
9
6200 6400 6300 6200 5400 9
10
5700 5200 5300 5100 4900 10
12
4200 3800 3800 3700 3700 12
14
3000 3000 3000 2900 14
16
2200 2400 2300 16
18
1800 1700 1800 18
20
1500 1500 20
22
1200 22
Number of lines 8 6 6 4 3 3 Number of lines
Telescoping condition(%)
Ⅰ 100% 100% 100% 100% 100% 100% Ⅰ
Ⅱ 0 20% 40% 60% 80% 100% Ⅱ
Ⅲ 0 20% 40% 60% 80% 100% Ⅲ
Ⅳ 0 20% 40% 60% 80% 100% Ⅳ
Unit:Kg
1. Values listed in the table refer to rated lifting capacity measured at at and solid gound under the lever state of the crane.
2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.
3. Rated load values determined by stability shall comply with ISO 4305.
4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.
5. If actual boom length and range are between two values specied in the table, larger value will determine the lifting capacity.
https://www.besttruckmanuals.com/