User's Guide

Type-A Receiver

SANWA RC5

User Guide

How to pair USB radio dongle with the mouse

1. Plug the USB radio dongle into the USB port of the target device.

2. Press left+middle+right keys on the mouse. The LED will start

blinking cyan (blue).

3. Place the mouse close to the USB radio dongle (no farther than

10 cm).

4. After successful pairing, the LED will go off.

How to use USB radio dongle with the mouse

1. Plug the USB radio dongle into the USB port of the target device.

2. Press any key on the mouse to activate connection to the USB

radio dongle.

Manufacturer:Shenzhen Hangshi Technology Co.,Ltd

Add:Hangshi Technology Park,Democracy West Industry Area,

Shajing Town,Bao'an District,Shenzhen,China

PAGE 1
Type-A Receiver SANWA RC5 User Guide How to pair USB radio dongle with the mouse 1. Plug the USB radio dongle into the USB port of the target device. 2. Press left+middle+right keys on the mouse. The LED will start blinking cyan (blue). 3. Place the mouse close to the USB radio dongle (no farther than 10 cm). 4. After successful pairing, the LED will go off. How to use USB radio dongle with the mouse 1. Plug the USB radio dongle into the USB port of the target device. 2.
PAGE 2
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.