Owner's Manual

Table Of Contents

PAGE 1
SANS SYSTEMS THE UNION OF FORM AND FUNCTION Assembly Instructions for Vision Mount UMBRA Thank you for purchasing 4 Vision Mount product. This product is designed to hold a VCR, DVD player, or cable / satellite box under a MTV television wall mount. It will accommodate one component up to 15 Ibs. Check carefully to make sure there are no missing or defective parts. Never use defective parts.
PAGE 2
Step 3: Add an Extension Arm (b) to each side of the Main Ann (a). Lock each Extension Arm into place at the desired width using a Set Screw {g). Tighten the Set Screw with the Allen Key (i) as shown in Diagram 3 below. Step 4: A Component Holder (c) fits info the track on the inside of each Extension Am (b). Next, a Knob (h) passes through the slot in the Extension Arm from the outside and threads into the hole in each Component Holder as shown in Diagram 4 below.