VST4 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520. We’re ready to help! Scan for easy install video http://san.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! 1 Does your TV weigh more than 50 lb (22.7 kg) including accessories? 50 lb No — Perfect! (22.7 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
STEP 1 Attach Bracket to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
1-1 Select TV Screws 1-2 Spacers Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use. Your TV type will help you determine which hardware configuration to use. Match your type of TV to the suggested hardware configuration on the next page. M4 M6 M8 A. Installation option without spacers (TVs with flat backs). B. Installation option using spacers (TVs with obstructed backs or inset mounting holes).
1-3 Measure Your TV Hole Pattern Measure the width and height of your TV hole pattern in mm. 1-4 Attach Extensions (200 x 200 mm ONLY) If mounting to a TV with a 200 x 200 mm (7 ⅞ x 7 ⅞ in.) hole pattern, add the extension plates 02 to the TV bracket 01 using the extension plate screws 03 and nuts 04 . NOTE: Nuts 04 are poly-locks and will need to be forcibly tightened. Record your measurements: Width mm x Height mm 01 es inch cm 75 mm = 7.5 cm = 3 in. 100 mm = 10 cm = 4 in.
1-5 Attach TV Bracket Position the TV bracket 01 over your TV hole pattern and install using the screw, washer, and spacer (if needed) combination you selected for your TV. 200 x 200 mm 01 200 x 100 mm 100 x 100 mm 01 M4/M6/M8 screw and washer 05 07 08 10 11 01 15 16 M4 spacer, screw, and washers 13 75 x 75 mm 15 15 06 NOTE: If the hole pattern on your TV is 75 x 75 mm the washer 15 will not be used.
STEP 2 Attach Wall Plate to Wall Parts and Hardware for STEP 2 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! Wall Plate Template Wall Plate Sanus Magnetic Stud Finder 19 x1 Lag Bolts .2 x in. 4/1 ¼.
STEP 2 Wood Stud ONLY! CAUTION: Avoid potential personal injuries and property damage! ƕ ƕ ƕ 1 Drywall covering the wall must not exceed 16 mm (5/8 in.) Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1½ x 3½ in.) Stud center must be verified Max. 16 mm (5/8 in.) Min. 89 mm (3 1/2 in.) Min. 38 mm (1 1/2 in.) NOTE: See Introducing Sanus Magnetic Stud Finder * located in your Welcome folder for more detailed operation of stud finder. 1.
4. Place the wall plate template 17 at your desired height and position the slotted holes over your stud center line. Level the wall plate template 17 and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT: Be sure you mark and drill into the center of the stud. Drill the two pilot holes using a 3 mm (1/8 in.) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.). 5. 6. Remove the wall plate template 17 .
STEP 3 Attach TV to Wall Plate HEAVY! You may need assistance with this step. IMPORTANT: The locking tab needs to be in the unlocked position before attaching the TV to the wall plate. Once the TV is on the wall plate, the locking tab needs to be in the locked position.
Troubleshooting ADJUSTING THE TILT: Loosen the knob on the TV bracket to adjust the tilt of your TV. Tighten the knob when your TV is set to the desired tilt. REMOVING THE TV: Place the locking tab into the unlocked position and lift the TV up and out away from the wall plate.
Dimensions 7.87 200.0 3.94 100.0 2.95 75.0 12° 0.34 8.8 3.94 100.0 7.50 190.5 5.25 133.3 0.22 5.5 8.69 220.7 2.95 75.0 7.87 200.0 0.35 8.8 1.78 45.
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES. CONSÉRVELAS. LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO. Antes de comenzar, verifiquemos que este soporte sea perfecto para usted. 1 ¿Su televisor pesa más de 22.7 kg (50 libras) incluyendo los accesorios? No — ¡Perfecto! 50 libras (22.7 kg) Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.
ESPAÑOL PASO 1 Fijar la placa de sujeción al televisor Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor; póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas.
ESPAÑOL 1-5 Coloque la placa de sujeción Ubique la placa de sujeción 01 sobre el patrón de orificios del televisor e instálela usando la selección de tornillo, arandela y espaciador (si fuera necesario) que seleccionó para su televisor. NOTA: Si el patrón de orificios de su televisor de es 75 x 75 mm 15 no deberá utilizar la arandela.
ESPAÑOL PASO 2A Opción para montantes de madera * ADVERTENCIA: Este producto contiene un imán. Si utiliza un dispositivo médico implantado como un marcapasos o un desfibrilador automático implantable (DAI), los campos magnéticos pueden afectar el funcionamiento de esos dispositivos, y causar heridas de gravedad o la muerte. Si tiene un dispositivo médico implantado, mantenga una distancia de al menos 13 cm (5 pulgadas) entre su dispositivo y el imán. Consulte a su médico antes de utilizar este producto.
ESPAÑOL PASO 3 Fijar el televisor a la placa mural ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. IMPORTANTE: La pestaña de bloqueo debe estar en la posición abierta antes de fijar el televisor a la placa mural. Una vez que el televisor se encuentra en la placa mural, debe llevar la pestaña de bloqueo a la posición de bloqueo.
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.
Scan here to view your install video. san.us/401 GET STARTED WITH STEP 1 Grab the TV bracket and line it up with the holes on the back of your TV. Attach using the bolts that fit from the Step 1 hardware bag. THIS IS YOUR DRILLING TEMPLATE FOR STEP 2 Locate your stud and choose a height for your TV, then simply tape this template to the wall and you can drill right through .
SANUS MAGNETIC STUD FINDER Designed to find your studs & make life easier- included in hardware kit.
TWO SIMPLE STEPS TO FINDING YOUR STUDS Holding it vertically, lightly move the SAN US Magnetic Stud Finder up and down while sliding across your wall. The magnet within will be attracted to the screws in the stud. Once the magnet has landed on a screw, place a pencil mark on the wall directly below the magnet. You can verify that this is a stud by moving the Magnetic Stud Finder up or down to find a second or third screw within the wall.
SAN US FOLLOW SAN US ON YOUR FAVORITE SOCIAL NETWORKS! Learn ways to get the most out of your space. Find product updates and more. FACEBOOK.COM/SANUSSYSTEMS Learn installation tips, tricks and household know-hows. TWITTER.COM/SANUSSVSTEMS YOUTUBE.COM/SANUSSYSTEMS You ID View step-by-step product videos to ease your install experiences. Find the latest news stories about your favorite SAN US products. 67IJO.
SAN US' I REGISTER YOUR NEW SAN US PRODUCT! By registering, you·ll be entered to win, and will receive the latest product updates, design tips, and other ways to enhance your life in your home. Visit SANUS.com/register to complete your registration and start enjoying all of the benefits SAN US has to offer. Leave a product review and let us know how your install went I ***** If you ever have questions about your SAN US product, give us a call at 1-800-359-5520.
