Owner's Manual

6901-002026 <00>
11
2-2
If you are attaching the anti-tip strap to wood furniture:
1. Locate a secure area near the top of the furniture that is at least 13 mm (1/2 in.) thick.
2. Drill pilot hole to a depth of 13 mm (1/2 in.) using a 2.5 mm (7/64 in.) diameter drill bit.
3. Place the mounting plate (P) over the drilled hole on the back of the furniture. Insert and tighten screw [06].
CAUTION: To avoid potential injuries or property damage!
Ù Ensure mounting plate (P) is securely fastened to the furniture.
Ù Ensure all straps (S) are tight.
CAUTION:
1
2
3
(S)
(P)
[06]
(P)
(S)
(S)
2.5 mm
(7/64 in.)