GET IT RIGHT THE FIRST TIME BLF328 INSTRUCTION MANUAL Texto en español, página 14 Follow this step-by-step instruction manual to speed up your installation. WE’RE HERE TO HELP Want to watch a video that shows how easy this DIY project will be? Watch it now at: SANUS.com/2783 Get it right the first time. HeightFinder™ shows you where to drill. Check it out at: SANUS.com/1172 Our US-based install experts are standing by to help. Call us at: 800-359-5520 Or, chat at: SANUS.
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUC- TIONS Please read through these instructions completely to be sure you’re comfortable with this easy install process. Check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service 1-800-359-5520.
Dimensions TV INTERFACE 7.87in 200mm MIN 15.75in 400mm MAX WALL PLATE 2.36in 60mm 14.55in 369.6mm 11.57in 293.8mm WA WALL IS ON TOP 24.00in 609.6mm DOWN 18.72in 475.6mm 9.27in 235.4mm 57deg 16.00in 406.4mm SIDE VIEW - EXTENDED 15 deg WALL IS ON RIGHT 21.83in 554.6mm TOP VIEW - EXTENDED 33.68in 855.6mm .36in 9.1mm FULLY ASSEMBLED MOUNT 5 deg UP 57deg 28.00in 711.2mm SIMULATED ATED 65" FLAT SCREEN CREEN TV TOP VIEW - RETRACTED SIDE VIEW RETRACTED WALL IS ON TOP 33.80in 858.6mm 2.
STEP 1 Attach TV Bracket to TV WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. STEP 1 Parts and Hardware 01 TV Screws (qty.
1.3 Attach TV Brackets to Your TV 1 2 MEASURE ADJUST TO WIDTH W M W W H M 06 inches W mm H mm cm mm 4 10 100 7⅞ 20 200 11 ¾ 30 300 15 ¾ 40 400 19 ¾ 50 500 23 ¾ 60 600 inch dimensions are approximate 400 mm position illustrated Measure the WIDTH and HEIGHT of your TV's mounting hole pattern. Adjust mounting tabs M on TV brackets 06 to match the width W of your TV's mounting hole pattern.
4 5 LOOSELY ASSEMBLE CENTER 04 06 06 06 4X A NO SPACER 02 SPACER NEEDED B 01 02 01 03 Adjust TV brackets 06 to align with your TV hole pattern. Install using the screw 01 /washer 02 /spacer 03 combination you selected for your TV. 6 TV bracket 04 must be centered on your TV, but can be offset up or down to avoid cable interference.
STEP 2 Attach Wall Plate to Wall WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used. Parts and Hardware for STEP 2 Lag Bolt Wall Plate Template 07 x1 5/16 in. x 3½ in.
STEP 2A Attach Wall Plate Wood Stud Installation CAUTION: Avoid potential personal injury or property damage! Min. 1 ½ in. (3.8 cm) ● Drywall covering the wall must not exceed 5/8 in. (1.5 cm) Min. 3 ½ in. (8.9 cm) Min. 16 in. (40.6 cm) ● Minimum wood stud size: nominal 2 x 4 in. (5.1 x 10.2 cm) actual 1 ½ x 3 ½ in. (3.8 x 8.9 cm) Max. 5/8 in. (1.5 cm) 1 ● Minimum horizontal space between fasteners:16 in. (40.
STEP 2B Attach Wall Plate CAUTION: Avoid potential personal injury or property damage! ● ● ● ● Mount the wall plate 08 directly onto the concrete surface Minimum solid concrete thickness: 8 in. (20.3 cm) Minimum concrete block size: 8 x 8 x 16 in. (20.3 x 20.3 x 40.6 cm) For concrete applications, arm 11 (STEP 3) must remain centered (horizontally) in wall plate 08 .
STEP 3 Attach TV to Wall Plate WARNING: Before starting assembly, verify this part is undamaged. If damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! Parts and Hardware for STEP 3 CABLE COVERS C C CABLE COVERS (ATTACHED) (ATTACHED) 5/32 in. 3/32 in. Hex Key 10-32 x 3/8 in. Securement Screw Arm Assembly 11 x1 S 13 x1 Hex Key 14 x1 12 x1 LOCKING SCREWS (ATTACHED) 3.
3.2 Hang TV onto Arm Assembly 1 2 HANG YOUR TV ATTACH HEAVY! You may need assistance with this step. 04 04 11 11 3 SECURELY TIGHTEN 12 11 14 04 CAUTION: Avoid potential personal injury or property damage! Always make sure your securement screw 12 is tightened, so the TV is securely fastened to the arm assembly 11 .
Adjustments EXTEND / RETRACT -- ONLY IF NECESSARY TV LATERAL SHIFT HEAVY! You may need assistance with this step. 13 CAUTION: Avoid potential injuries or property damage! Do NOT adjust the arm position from center for concrete applications. Arm 11 MUST remain centered in wall plate 08 for all concrete applications! E For wood stud applications ONLY: CAUTION: Avoid potential personal injury or property damage! TIP: 1. 2. Remove the TV (See PAGE 13). Open cover strips P . 3. 4.
1 2 11 3 P 4 5 11 08 6 P S 14 P REMOVE THE TV REMOVE THE ARM ASSEMBLY HEAVY! You may need assistance with this step. 1. Disconnect all cables from the TV. 2. 3. Remove securement screw 12 . Pull down on the release cord R to release the TV. 4. Carefully lift the TV from arm assembly 11 .
INSTRUCCIONES IMPORTANTES DE SEGURIDAD ESPAÑOL – LEA TODO ESTE MANUAL ANTES DE UTILIZAR ESTE PRODUCTO – GUARDE ESTAS INSTRUCCIONES Lea atentamente estas instrucciones en su totalidad para asegurarse de que está familiarizado con el sencillo proceso de instalación. Consulte igualmente el manual de su televisor para conocer si existen requisitos especiales para el montaje de su aparato.
PASO 2A Fijar la placa mural para montantes de madera VER PÁGINA 8 ESPAÑOL PRECAUCIÓN: Evite lesiones personales y daños materiales.
Thank you for choosing SANUS! If you ever have questions about your SANUS product, give us a call. We're ready to help! Si en algún momento tiene preguntas sobre su producto SANUS, llámenos. ¡Estamos a su disposición! 800-359-5520 info@legrand.com SANUS.com Legrand AV Inc. and its affiliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete.
