VLF320 INSTRUCTION MANUAL We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Scan for easy install video http://san.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE Before getting started, let’s make sure this mount is perfect for you! 1 Does your TV weigh more than 120 lb (54 kg) including accessories? 2 What is your wall made of? 3 120 lb No — Perfect! (54 kg) Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 (UK: 0800-056-2853) to find a compatible mount.
Dimensions 1.61 40.9 in. [mm] 2.00 50.8 11.81 299.9 20.80 528.3 0.34 8.6 16.00 406.4 16.00 406.4 24.00 609.6 MIN 4.62 - MAX 30.62 777.8 6.40° CL WALL 20.39 518.0 PLATE 1.50 ROLL CONTROL 1.76 44.7 CL TV BRACKET 16.54 420.0 0.43 11.0 32.16 816.
Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 2 Wall Plate Template 14 Wall Plate 15 x1 x1 Washers Lag Bolts Anchors 5/16 in. 16 x4 17 x4 5/16 x 2 3/4 in.
Parts and Hardware for STEP 3 Arm Assembly Felt Pads Wall Plate– Arm Assembly Screws 1/4 20 x 1/2 in. 21 Click Caps x8 23 Wall Plate Covers 24 x4 x2 Hex Keys TV Bracket–Click Cap Screws M3 5/32 in. M4 x 30mm 19 20 x1 22 x2 25 x2 x1 26 x1 Parts and Hardware for Cable Management Cable Cover Screws Cable Cover R Cable Cover Hex Key M4 x 10mm 28 x1 Cable Covers 30 x8 M 2.
STEP 1 Attach Brackets to TV 1-1 Select TV Screws 1-2 Select TV Spacers Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M4, M6, or M8) to use. Spacers and screws are supplied to install your TV bracket. M4 M6 M8 Determine your preference for spacer configuration when attaching your TV bracket. a b Do not use spacers if your TV has a flat back AND you want your TV closer to the wall.
1-3 Attach Spacers to TV Brackets NOTE: Skip this step if your TV has a flat back AND you want your TV closer to the wall. 1. Press the four shoulder washers 11 through the openings of TV brackets 01 that line up with your TV hole pattern. 2. Snap the four spacers 12 or 13 you selected in STEP 1-2, onto shoulder washers 11 .
1-4 Attach TV Brackets to TV Center the TV brackets 01 over your TV hole pattern as shown, making sure the brackets are level with each other. Install using the screw and washer combination [a] or [b] you selected for your TV. NOTE: Use washer 09 for screws 02 and 06 . Use washer 10 for screws 03 , 04 , 05 , 07 , and 08 .
STEP 2A Attach Wall Plate to Wall Wood Stud Option CAUTION: Avoid potential personal injuries and property damage! ● ● ● Drywall covering the wall must not exceed 5/8 in. (16 mm) Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm) Minimum horizontal space between fasteners: 16 in. (406 mm) 1. Stud centers must be verified – not all walls have conventional 16 in. (406 mm) stud spacing.
3. Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm). 4. Install the four washers 17 and lag bolts 18 . Tighten all four lag bolts 18 only until the washers 17 are pulled firmly against the wall plate 15 . CAUTION: Improper use could reduce the holding power of the lag bolts 18 . DO NOT over-tighten the lag bolts. Go to STEP 3 on PAGE 14. 3 3 in. (75 mm) 4 17 18 7/32 in. (5.
STEP 2B Attach Wall Plate to Wall Solid Concrete or Concrete Block Option CAUTION: Avoid potential personal injuries and property damage! ● ● ● ● Mount the wall plate 15 directly onto the concrete surface Minimum solid concrete thickness: 8 in. (203 mm) Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm) Minimum horizontal space between fasteners: 16 in. (406 mm) 1. Position the wall plate template 14 on the wall at your desired height. Level the wall plate and mark the four hole locations.
Insert four anchors 16 . 3. CAUTION: Be sure the anchors 16 are seated flush with the concrete surface. Install the four washers 17 and lag bolts 18 . Tighten all four lag bolts 18 only until the washers 17 are pulled firmly against the wall plate 15 . 4. CAUTION: Improper use could reduce the holding power of the lag bolts 18 . DO NOT over-tighten the lag bolts.
STEP 3 Attach TV to Wall Plate 3-1 Attach Arm Assembly to Wall Plate NOTE: Arm assembly 19 can be adjusted side-to-side to customize your TV installation. 1. Align four holes at the top and four at the bottom of arm assembly 19 to the slots in the wall plate 15 . 2. Secure the top portion of arm assembly 19 to the wall plate 15 with four screws 21 using hex key 26 . 3. Secure the bottom portion of arm assembly 19 to the wall plate 15 with four screws 21 using hex key 26 .
3-2 Hang TV onto Arm Assembly HEAVY! You may need assistance with this step. 1. Hook the TV brackets 01 onto the arm assembly 19 , as shown. 2. Attach click caps 20 to TV brackets 01 with screws 22 using hex key 25 . CAUTION: Avoid potential personal injury or property damage! Screws 1 01 19 22 must be installed to secure the TV onto the arm assembly 19 .
3-3 Apply Protective Felt Pads 3-4 Attach Wall Plate Covers Affix self-adhesive felt pads 23 onto the arm assembly 19 to protect your wall. Attach wall plate covers 24 onto wall plate 15 .
Manage Cables 1. Thread your TV cables through the channels in the middle and lower branches of the arm assembly 19 . 2. Attach cable covers 27 , 28 and 29 to the arm assembly 19 . Secure with screw 30 using hex key 32 . 3. Route cable ties 31 through the tie holders T .
Adjustments LEVEL TILT Loosen the level screw L using hex key 26 , adjust your TV, then tighten the level screw L . Your TV should adjust easily when moved, then stay in place. Adjust the tilt tension knob K if your TV naturally tilts up or down. NOTE: If you do not intend to adjust the tilt for different viewing locations, you can tighten the tilt tension knob K to prevent unwanted movement.
TV LATERAL SHIFT REMOVING THE TV HEAVY! You may need assistance with this step. HEAVY! You may need assistance with this step. 1. Remove the TV by reversing the procedure in STEP 3-2 on PAGE 15. 2. Remove the arm assembly 19 by reversing the procedure in STEP 3-1 on PAGE 14. 3. Reposition the arm assembly 19 (STEP 3-1 on PAGE 14). 4. Reattach the TV (STEP 3-2 on PAGE 15). 1. Remove the TV by reversing the procedure in STEP 3-2 on PAGE 15. 2.
ESPAÑOL INSTRUCCIONES DE SEGURIDAD IMPORTANTES: CONSÉRVELAS Y LEA TODO EL MANUAL ANTES DE UTILIZAR ESTE PRODUCTO Antes de comenzar, verifiquemos si este soporte es el adecuado para usted. 1 ¿Su televisor pesa más de 54 kg (120 lb) incluyendo los accesorios? No — ¡Perfecto! 54 kg (120 lb) Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible.
ESPAÑOL Piezas y elementos de sujeción Ver PÁGINA 4 ADVERTENCIA: Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor. Póngase en contacto con el servicio de atención al cliente. Nunca utilice piezas deterioradas. NOTA: No todos los elementos de sujeción incluidos deberán utilizarse.
ESPAÑOL 1-4 Acople las placas de sujeción del televisor 1. Centre el soporte del televisor 01 en el patrón de orificios como se indica en la ilustración, asegurándose de que los soportes estén nivelados. Haga la instalación utilizando la combinación de espaciadores, tornillos y arandelas que seleccionó para su televisor. NOTA: Utilice la arandela 09 para los tornillos 02 y 06 . Utilice la arandela 10 para los tornillos 03 , 04 , 05 , 07 y 08 . NOTA: Se ilustran las configuraciones estándar.
ESPAÑOL PASO 2B Fijar la placa mural a la pared Opción para hormigón sólido o bloques de cemento PRECAUCIÓN: Evite posibles lesiones personales y daños materiales. ● ● ● ● 1.
ESPAÑOL 3-2 Cuelgue el televisor en el módulo del brazo ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. 1. Asegúrese de enganchar los soportes del televisor en la placa de conexión, como se muestra en la ilustración. 2. Fije las tapas 20 a la placa de conexión 01 utilizando los tornillos 22 . Ajústelos con la llave hexagonal 25 . PRECAUCIÓN: Evite el riesgo de lesiones y daños materiales. Los tornillos 22 debe instalarse para fijar el televisor al ensamblaje del brazo 19 .
ESPAÑOL Ajustes Ver PÁGINA 18 NIVEL Afloje el tornillo de nivel L utilizando la llave hexagonal 26 , ajuste su televisor y vuelva a ajustar el tornillo de nivel L . INCLINACIÓN El televisor debe acomodarse fácilmente al moverlo y, posteriormente, quedar en su lugar. Si el televisor se inclina hacia arriba o hacia abajo de forma natural, ajuste la perilla de tensión de inclinación K a mano.
Thank you for choosing Sanus! Please take a moment to let us know how we did: Call us: 1-800-359-5520 UK: 0800 056 2853 Email us: info@sanus.com Like us on Facebook.com /sanussystems Leave a review: sanus.com Follow us on Twitter: @ sanussystems Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.
