User Guide

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 04.06.06 (100043)
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
Step 4: Add Top Glass Shelf
Place four Glass Protectors (L) evenly along the top of the Front Frame (A); then, add two Glass protectors to the top of
each Rear Support (E).
Place the Top Glass Shelf (G) onto the Glass Protectors as shown in Diagram 4.
Diagram 4
Step 5: Install Plastic Wire Covers
To install the Plastic Wire Covers (F) insert one edge of the Plastic Wire Cover into one of the grooves in the Rear Support
(E) as shown in the Top View of Diagram 5; then, insert the other edge of the Plastic Wire Cover into the adjacent groove in
the Rear Support. Repeat this procedure for the second Plastic Wire Cover.
NOTE: The Top Glass Shelf in Diagram 5 is shown as a cut-away view to provide greater detail of how the Plastic
Wire Cover attaches to the Rear Support.
Diagram 5
Top View
Plastic Wire
Cover (F)
Grooves in
Rear Support (E)
E
H
F
L
G
L
A
E