Specifications

4
IMPORTANT INFORMATION
2.1 Products manufactured by Santon are to British and European Standards.
These appliances are safe and without risk, provided they are installed, used
and maintained in good working order in accordance with our instructions
and recommendations.
2.2 Please read and understand these instructions before starting work
and retain them for later use.
2.3 DO NOT operate the appliance if it is frozen, or suspected of being
frozen. See fault nding table.
2.4 These heaters are of the closed outlet type (unvented pressure system) and
are suitable for connection to normal cold water mains supplies up to a
maximum of 0.25MPa (2.5bar) for 7kW and a maximum of 0.7MPa
(7.0bar) for 9kW and12kW
2.0 SAFETY
1.0 INTERNAL COMPONENTS
FIXING HOLES (3 NOS.)
TEMPERATURE
LIMITER 1
(ONE SHOT
OVER TEMP
CUT-OUT)
CABLE GRIP
DRAIN PLUG
DIFFERENTIAL PRESSURE
SWITCH ASSEMBLY
MAINS CONNECTOR BLOCK
WATER CONTAINER
ASSEMBLY
TEMPERATURE LIMITER 2
(OVER TEMP CUT-OUT)
Figure 2