Specifications

4
IMPORTANT INFORMATION
2.1 Products designed by Santon are to British and European and UL Standards.
These appliances are safe and without risk, provided they are installed, used
and maintained in good working order in accordance with our instructions
and recommendations.
2.2 Please read and understand these instructions before starting work
and retain them for later use.
2.3 DO NOT operate the appliance if it is frozen, or suspected of being
frozen. See fault nding table.
2.4 These heaters are of the closed outlet type (unvented pressure system) and
are suitable for connection to normal cold water mains supplies up to a
maximum of 0.5MPa (5bar)
2.5 DO NOT operate the appliance if:
1. Water ceases to ow during use.
2. Water has entered inside the unit because of an incorrectly tted cover.
3. If the appliance is damaged.
2.6 ISOLATE the electrical and water supplies before removing the cover.
2.7 ISOLATE the electrical and water supplies BEFORE proceeding with
installation or servicing.
2.0 SAFETY
1.0 INTERNAL COMPONENTS
FIXING HOLES (3 NOS.)
TEMPERATURE LIMITER 1
CABLE GRIP
DRAIN PLUG
DIFFERENTIAL PRESSURE
SWITCH ASSEMBLY
MAINS CONNECTOR BLOCK
WATER CONTAINER
ASSEMBLY
TEMPERATURE LIMITER 2
Figure 2
7kW / 9kW