Specifications

3.11 To obtain full advantage of the power provided by the hand wash, use the

shortest cable route possible from the consumer unit to the hand wash.

3.12 If your consumer unit has a rating below 80A or, if there is no spare fuse way,

then the installation will not be straightforward and may require a new

consumer unit. A qualied electrician should install the new consumer unit. It

may be necessary to contact your electrical supplier to upgrade your supply.

CAUTION

3.13 To enhance electrical safety a 30mA residual current device (RCD) should be

installed in all electric hand wash circuits. This may be part of the consumer

unit or a separate unit. DO NOT use a rewireable fuse, instead use a suitably

rated miniature circuit breaker (MCB) or cartridge fuse. The hand wash must be

connected to its own independent electrical circuit.