Specifications

Multipoint
3
3
1.1 A pressure relief device (PRD) is designed into the handwash appliance,
which complies with European standards. The PRD provides a level of
appliance protection should an excessive build-up of pressure occur within
the appliance.
1.2 DO NOT operate the handwash with a damaged spout or blocked sprayplate,
which can cause the PRD to operate.
IMPORTANT INFORMATION
2.1 Products manufactured by Santon are to British and European Standards.
These appliances are safe and without risk, provided they are installed, used
and maintained in good working order in accordance with our instructions
and recommendations.
2.2 Please read and understand these instructions before starting work
and retain them for later use.
2.3 DO NOT operate the appliance if it is frozen, or suspected of being
frozen. See fault nding table.
2.0 SAFETY
1.0 INTERNAL COMPONENTS
Thermal
cut-out
Front
cover
Inner
container
Pressure switch
Flow control valve
anticlockwise
Rating label
Cable clamp
Pressure relief device (PRD)
Spout fixing nut
Outlet spout
Sprayplate
Figure 1 Internal components - 3.1kW (refer to fig.2 page 6 for 7.2kW )
Terminal block
To close: turn
Thermostat