User manual

User Manual
SVS-3001
_________________________________________________________________________________
- 17 -
PTZ control panel:
The PTZ control panel is only displayed when PTZ has been
enabled (see chapter “2.4.2 PTZ”).
Pan/tilt arrows: Click to move the image.
“+” and “-“: Click to zoom in/out.
PTZ presets: List of presets.
Alternatively, instead of using the PTZ control panel, you
may simply click into the live view picture to move it
(SANTEC “EasyViewPTZ” technology).
Note:
The OSD button (in the middle of the control panel) and the
tour function are only available using a Pelco protocol.