User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 48 -
2.3 Connect Ethernet cable
The use of a CAT5 Ethernet cable is recommended for network connections. To have the
best transmission quality, cable length shall not exceed 100 m. Connect one end of the
Ethernet cable to the RJ-45 connector of the IP camera and the other end of the cable to the
network switch or PC.
Note:
In some cases you may need to use an Ethernet crossover cable when connecting the IP
camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please
check the LAN connection.
Green: Indicates good network connection.
Orange: Light flashes for network activity indication.
AUTO
IRIS
1 2 3 4
I/O
NETWORK
DC12V
LINE
LINE IN
MIC IN
OUT
VIDEO
DC
RESET