User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 45 -
Lead the (open-ended) cable(s) through the grommet (c).
If you only use one cable, please close the second (not-used) cable hole in the
grommet (c) with the red stopper (d).
Fix the lid (e) onto the gland (b).
Put the white washer (a) on the other end of the gland (b).
The cable gland is now ready for putting it into the side hole of the camera housing.
The connection between the housing and the gland is now water-proof.
Steps 10-18:
Identical to chapter 2.1
If you need to install the camera in another way than surface-mounted indoors or outdoors
(see chapters 2.1 and 2.2), you may install it as follows:
In-ceiling (flush) mounting
Corner mounting
Pole mounting
For these options mentioned above, special accessories such as brackets or adaptors are
required which are not included in this camera shipment. Please order the respective
accessories separately at our webshop at www.santec-video.com