User manual

User manual

SANTEC IP cameras

_________________________________________________________________________________

- 44 -

Step 17:

Put the dome cover back on.

Please align the arrow mark on the dome

cover with the one on the housing as

shown.

Step 18:

Screw the two torx screws on the side of the

dome cover tightly to fasten the dome

cover.

The camera installation is now completed.

Please prepare the camera in the following way to use it for outdoor applications:

Steps 1-8:

Identical to chapter 2.1

Step 9:

Firstly, prepare the cable gland:

Screw-off the lid (e) from the gland (b).

Remove the black rubber gasket from the inside of the gland. This rubber gasket is

not needed anymore.

Press the black cable grommet (c) firmly into the gland (b).