User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 42 -
Step 10:
Connect the ports on the camera module with
their cables/wires respectively, as shown in the
figure.
Step 11:
Attach the snap-on camera module on the
housing plate and screw the module-fastened
screw tightly with a screw driver to secure the
camera module.
Note:
The terminal blocks should face the side
conduit entry, as shown in the figure.
Step 12:
Connect the power and network outputs. (The power cable is omitted if using PoE.)
Step 13:
Access the camera by its web browser and display the live view (see “Part II, chapter 1
General”).