User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 32 -
SNC-5312IR, SNC-5315IR and SNC-5323IR:
The following connectors/cables already attached to the camera:
SD card slot, reset button and video test connector
Open the lid on the camera housing’s bottom and you will have access to the micro SD card
slot, the reset button and the video test connector.
Network (PoE)
Power
Audio out
Relay = switching output contact
Sensor = alarm input contact
Lid open
Reset
Video test connector
Micro SD card slot
Reset to factory default:
Keep camera connected to
power.
Use a pointed device to
press onto the reset button
and hold it for approx. 1
sec.
Release the button and
wait approx. 1 sec.
Press and hold the reset
button for approx. 30 sec.
The camera is now
restored to factory default
settings.
Audio in