User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 30 -
SNC-4302:
Camera inside view:
Connector
Definition
Description
1
Reset button
Reset to factory default.
Keep camera connected to power.
Use a pointed device to press onto
the reset button and hold it for
approx. 1 sec.
Release the button and wait approx.
1 sec.
Press and hold the reset button for
approx. 30 sec.
The camera is now restored to
factory default settings.
2
Lens
Turn the lens clockwise/counter-
clockwise to adjust the focus.
3
Focus fixed screw
Loosen the screw to adjust the lens.
4
Tilt fixed screw
Loosen the screw to adjust the tilt angle.
5
Micro SD card slot
For video recording storage.