User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 29 -
SNC-3322:
On the camera rear, you will find the following connections:
Reset to factory default:
Keep camera connected to power.
Use a pointed device to press onto the reset button and hold it for approx. 1 sec.
Release the button and wait approx. 1 sec.
Press and hold the reset button for approx. 30 sec.
The camera is now restored to factory default settings
2-way audio
transmission
PoE connection
RJ-45
Video connection BNC
SD card slot
Power connection
12 V DC / 24 AC
(also see chapter 2.1)
Alarm I/O connection
(also see chapter 2.3)
Power LED
Reset button