User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 144 -
2.7 PTZ (only for SNC-8322I and SNC-8322HO)
2.7.1 Profile
The profile setting can be found under this path: PTZ > Profile
1. Select a profile number:
Normal: Standard
1-10: Per selected profile, you can define an individual name
2. If required, enable the box “by schedule” and select a schedule (at least one schedule
has to be defined; see chapter 2.3.8). The profile setting also works without setting a
schedule.
3. Confirm by ticking the box.
If you have set a profile 1-10, all following camera settings will refer to these profiles, i.e.
exposure, white balance, image adjustment, backlight, digital zoom, IR light, WED and noise
reduction.