User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 126 -
2.3.12 Firmware update
The software upgrade settings can be found under this path: System > Firmware update
Make sure the upgrade software file is available before carrying out software upgrade.
The procedure of software upgrade is as follows:
1. Click on <Browse> and select the file to be uploaded.
Note: Do not change the upgrade file name or the system will fail to find the file.
2. Click on <Update>. The system checks if the upgrade file exists. The upgrade
process is then started. This may take a while. At 100%, the upgrade process is
completed. The camera is now updated with the latest version and it automatically
reboots.
We recommend to restore the camera to factory default settings. Go to chapter 2.3.11
for <Factory default>.