User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 107 -
2.3.5.2 Motion detection
The motion detection settings can be found under this path:
System > Events > Motion Detection
The motion detection function allows detecting motion and triggering alarms when the motion
volume in the detected area reaches/exceeds the determined sensitivity threshold value.
On the motion detection setting page, there is a frame (=motion detection window) displayed
on the live video pane. The motion detection window is for defining the motion detection
area. To change the size of the motion detection window, move the mouse cursor to the edge
of the frame and draw it outward/inward. Moving the mouse to the center of the frame can
shift the frame to the intended position.
If you want to use motion detection “by schedule”, please define the schedule as described in
chapter 2.3.8.
Up to 10 motion detection windows can be set.
Click on the <Add> button under the live video pane to add a motion detection window.
To cancel a motion detection window, move the mouse cursor to the selected window and
click on the <Delete> button.