User manual

User manual
SANTEC IP cameras
_________________________________________________________________________________
- 106 -
Record video clip:
Select this item and the alarm-triggered recording will be stored on the micro
SD/SDHC card or via network share.
The <Pre-trigger buffer> recording function allows users to check what happened to
cause the trigger. The pre-trigger buffer time range is from 1 to 9 seconds.
Select <Upload for … sec> to set the recording duration after alarm is triggered.
The setting range is from 1 to 9999 seconds.
Select <Upload during the trigger active> to record the triggered video until the trigger
is off.
Note:
Please make sure that a micro SD/SDHC card is inserted into the camera in order to
make the recording work.
Also refer to chapter “2.3.7 Recording” for further details.
File name:
The uploaded image’s file name format can be set in this section. Please select the one that
meets your requirements.
Add date/time suffix:
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence number
Add sequence number suffix:
File name: imageXXXXXXX.jpg
X: Sequence number
Overwrite:
The original image in the FTP site will be overwritten by the newly uploaded file with a
static file name.
Save:
After you have completed all the settings mentioned above, please click on the <Save>
button to save all the settings in this page.