User manual

User Manual

SNC-3342 / SNC-6332

_________________________________________________________________________________

- 8 -

QUICK INSTALLATION GUIDE

IP panorama camera SNC-3342

To operate the panorama camera, please follow these steps:

1. Install the camera in the desired location.

2. Connect the camera to power using a suitable power adapter (12 V DC) or via PoE

(PoE switch or PoE injector required).

3. Connect the camera to the network using a LAN cable.

The network LED lights up in orange.

4. Insert the CD (included in the delivery) into your PC/laptop and install the IP-finder.

5. The IP-finder displays an IP address for the camera. Double-click on the IP address

and the Internet Explorer comes up automatically. In case this doesn’t work, you may

also enter the IP address (as shown by the IP-finder) manually into the Internet

Explorer. Using the IP-finder, another IP address can be assigned to the camera, if

required.

Note:

The camera comes with a default IP address:

Default IP address: 192.168.1.168 (or DHCP, if available)

User name: admin

Pass word: 9999

Please refer to the following chapters in this user manual for further information on camera

configurations.

Power LED

Network LED

SD card slot

12 V DC power jack

RJ-45 LAN socket

Focus adjustment

(turn the lens to adjust the focal

length)

1. Prepare a PC/laptop with an Ethernet

link to the network.

2. Connect the LAN port (RJ45) of the

camera to a network switch/hub.

No. 3 and 4 are not necessary if PoE

is used.

3. Plug-in the power jack.

4. Connect the 12 V DC adapter to

power..

5. Check the network LED status.