User manual

User Manual
SNC-3342 / SNC-6332
_________________________________________________________________________________
- 42 -
2.7.2 Advanced
NTP configuration:
Users may configure a NTP (Network Time Protocol) server so that the camera’s system
date and time can be synchronized with a specified time server or DHCP server.
HTTP setting:
Users may set the HTTP port that will be applied for web access. Default port = 80.
RTSP setting:
Users may set the RTSP (video) port for video data transmission. Default port = 554.
UPnP notification:
Check “Enable UPnP” so that the camera can be discovered in a UPnP compliant network.
NAT traversal setting:
Check “Enable NAT traversal” so that a client from the Internet can have access to the
devices behind the router.
Note:
With UPnP enabled, the IP sharing device (router) – capable of UPnP function – will
automatically be notified about the camera’s NAT port.