User manual

User Manual
SNC-3342 / SNC-6332
_________________________________________________________________________________
- 38 -
2.5.4 Event configuration
The event configuration setting can be found under the path: Event > Event configuration.
To add an event trigger, follow these steps:
1. Click on “Add” and the setup panel will be expanded (as shown above).
2. Give a name to this event.
3. Set the time interval between the triggers.
4. Set the time period for the trigger. Choose “Always” or “During time between” or
“Never”.
5. Triggered by: Select “motion detection” from the drop-down menu.
6. Choose the corresponding action once a motion has been detected.
7. Click on “Save” to store the configurations.