User manual

User Manual
SNC-3342 / SNC-6332
_________________________________________________________________________________
- 13 -
1.4.2 SNC-6332
Camera front view:
Interface
Description
Light sensor
The light sensor is for detecting the camera’s environmental
illumination. At night/in darkness, the IR cut filter is switched off
to let infrared light pass through for clear night view.
MIC (microphone)
The camera has a built-in microphone which is hidden in the
pinhole located on the front panel.
Lens focus
adjustment
Turn the lens to adjust the focus to get the best image.
If necessary, clean the lens with a soft cotton cloth.
Speaker
The camera has a built-in speaker which is hidden in the
pinhole located on the front panel.
Reset button
This button is hidden in the pinhole. It is used to restore factory
default settings. To do so, please follow these steps:
1. Unplug the power jack to turn off the camera.
2. Insert a pin into the reset hole and press and hold the reset
button for approx. 10 seconds.
3. Plug-in the power jack to turn on the camera while keep
pressing the reset button. The power LED will start flashing
after a short while.
4. Release the pin when the LED starts quick flashing. The
camera is now restored to factory default.