USER MANUAL Mega pixel fish-eye panorama camera Models: SNC-3342 SNC-6332 SNC-3342 SNC-6332 Version 1.
Dear customer, Thank you for purchasing a high quality SANTEC device. We recommend that you read this manual thoroughly before operating your new system for the first time. Please follow all instructions and observe the warnings contained in this manual. Please contact your local dealer or SANTEC directly if you have any questions or if you wish to claim for a service or warranty. You will find further information on our website: www.santec-video.com All rights reserved.
User Manual SNC-3342 / SNC-6332 Table of contents Safety precautions 5 Safety instructions 6 About this user manual 7 Quick installation guide 8 PART I: CAMERA CONNECTIONS; CABLING, TECHNICAL SPECIFICATIONS 1. General 1.1 Included items 1.2 System requirements 1.3 Dimensions 1.4 Control elements and connectors 1.4.1 SNC-3342 1.4.2 SNC-6332 10 10 10 11 12 12 13 2. Camera installation 2.1 Connect to power 2.2 SNC-6332: Installation using the mounting bracket 17 17 18 3.
User Manual SNC-3342 / SNC-6332 2.6. Schedule 2.6.1 General 2.6.2 Storage 2.7 Network 2.7.1 General 2.7.2 Advanced 2.7.3 SMTP (e-mail) 2.7.4 DDNS 2.8 System 2.8.1 Information 2.8.2 User 2.8.3 Date & time 2.8.4 Server maintenance 2.8.
User Manual SNC-3342 / SNC-6332 Safety precautions Caution Description of symbols Danger: This symbol is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person. Warning: This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
User Manual SNC-3342 / SNC-6332 Safety instructions Before operating the appliance, please read this manual carefully and retain it for further reference. Before cleaning the appliance, it has to be switched off and unplugged from the power outlet. Wipe the appliance with a soft damp cloth. Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.
User Manual SNC-3342 / SNC-6332 In case of any operating interruption or a complete operating failure please switch off the appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
User Manual SNC-3342 / SNC-6332 QUICK INSTALLATION GUIDE QUICK INSTALLATION GUIDE IP panorama camera SNC-3342 To operate the panorama camera, please follow these steps: 1. Install the camera in the desired location. 2. Connect the camera to power using a suitable power adapter (12 V DC) or via PoE (PoE switch or PoE injector required). Focus adjustment (turn the lens to adjust the focal length) Power LED Network LED SD card slot RJ-45 LAN socket 12 V DC power jack 3.
User Manual SNC-3342 / SNC-6332 QUICK INSTALLATION GUIDE IP panorama camera SNC-6632 To operate the panorama camera, please follow these steps: 1. Install the camera in the desired location. 2. Connect the camera to power using a suitable power adapter (12 V DC) or via PoE (PoE switch or PoE injector required). Lens adjustment 3. Connect the camera to the network using a LAN cable. The network LED lights up in orange. 1. Prepare a PC/laptop with an Ethernet link to the network. 2.
User Manual SNC-3342 / SNC-6332 Part I: Camera connections, cabling, technical specifications 1. General 1.1 Included items 1x 1x 1x 1x 1x IP camera SNC-3342 or SNC-6332 CD (IP-Finder and user manual) Quick installation guide Mounting bracket for SNC-6332 Camera stand/bracket for SNC-3342 1.2 System requirements To control the IP camera via the web browser, please ensure your PC has a good network connection and meets the system requirements as described below.
User Manual SNC-3342 / SNC-6332 1.3 Dimensions SNC-3342: 85 85 56 SNC-6332: 190 60 All dimensions in mm. Pictures not true to scale. Illustrations may vary from the actual product.
User Manual SNC-3342 / SNC-6332 1.4 Control elements and connectors 1.4.1 SNC-3342 Camera side view: Focus adjustment (turn the lens) Speaker Power LED Network LED SD card slot RJ-45 LAN socket 12 V DC power jack Camera rear view view: Reset button Terminal block (see below for details) Terminal block: Pin assignments: Pin 7 6 5 4 3 2 1 Function GND Audio Out Audio In GND DI DO__COM DO_NO Description 2-way audio connector. Connect Pin 3 (DI) to Pin 4 (GND) to activate the input contact.
User Manual SNC-3342 / SNC-6332 1.4.2 SNC-6332 Camera front view: Interface Description Light sensor The light sensor is for detecting the camera’s environmental illumination. At night/in darkness, the IR cut filter is switched off to let infrared light pass through for clear night view. MIC (microphone) The camera has a built-in microphone which is hidden in the pinhole located on the front panel. Lens focus adjustment Turn the lens to adjust the focus to get the best image.
User Manual SNC-3342 / SNC-6332 Camera rear view: Interface Description Power jack The input power is 12 V DC, 2A. RJ-45 LAN socket Connect to PC or hub/switch. For connection to 10Base-T Ethernet or 100Base-TX fast Ethernet cabling. Please use CAT-5 cable to connect the camera to a 100Mbps fast Ethernet network switch or hub. Note: Only use one power source, either from DC or from 802.3af Power-over-Ethernet (PoE).
User Manual SNC-3342 / SNC-6332 I/O terminal block: Pin assignments: Pin 1 Function GND Description 2 Digital input 4 3 Digital input 3 4 Digital input 2 Four sets of digital input, DI1 until DI4. The internal device is also photo-coupled electrical relay. In practice, the external device can be simply an on/off switch. Four sets of on/off switches can be connected as different trigger source.
User Manual SNC-3342 / SNC-6332 Application 2: _________________________________________________________________________________ - 16 -
User Manual SNC-3342 / SNC-6332 2. Camera installation 2.1 Connect to power 1. 2. 3. 4. Prepare a PC/notebook with an Ethernet link to the network. Connect the LAN port (RJ45) of the camera to a network switch/hub. Plug-in the power jack. Ensure that the power adaptor specification matches the power system (110 V or 220 V) and connect the adaptor to the outlet. 5. Check the LED status (power/network).
User Manual SNC-3342 / SNC-6332 2.2 SNC-6332: Installation using the mounting bracket Please follow the steps below to mount the camera using a mounting bracket.
User Manual SNC-3342 / SNC-6332 3. Technical specifications Camera Camera type SNC-3342 180° panorama IP camera Sensor type Resolution (pixel) Video codec Max.
User Manual SNC-3342 / SNC-6332 Camera Alarm management Schedule Management software support Security features Supported protocols Internal memory Video Content Analytics (VCA) Ethernet connector Ethernet standards Classification Vandal-proof Heater & fan Installation Camera mounting Housing color Housing material Integrated LEDs Voltage PoE standard Power consumption Operating temperature Storage temperature Rel.
User Manual SNC-3342 / SNC-6332 Appendix: Setup Internet security If ActiveX control installation is blocked, please either set the Internet security level to default or change ActiveX controls and plug-in settings. Internet security level: Default: 1. 2. 3. 4. Open the „Internet Options“ menu. Select “Security”. Click on „Reset all zones to default level“. Confirm by clicking “Apply” or “OK”. If the default settings don’t work, please use the customized settings for ActiveX Controls.
User Manual SNC-3342 / SNC-6332 Part II: Camera configuration and control via the web 1. General The camera is equipped with a user-friendly browser-based configuration interface. In this part of the user manual, information on system related settings and camera settings will be described in detail. Start your Web browser and enter the URL or IP address in the address field. Default IP address: Default user name: Default password: 192.168.1.
User Manual SNC-3342 / SNC-6332 2.2 Live view Admin button (go to administration page ) Display mode Language setting PTZ control panel Channel selection Action buttons (Full screen, speaker, talk, snapshot, recording) Language settings: On the live view page, you can select your language by clicking on the respective flag icon: English or German. Admin button: To exit the and to make changes to the camera set-up, click on the button.
User Manual SNC-3342 / SNC-6332 Display mode: As described in chapter 2.4.2 (“Camera > Advanced”), determine how the camera is installed, either on the wall, on the ceiling or on the table. Depending on the selected mounting, the following options regarding the display modes are available: Wall mount: If the camera is installed on a wall, the following display modes are available: “Original view”, “broad view”, “quad view with source” and “triple view”.
User Manual SNC-3342 / SNC-6332 Ceiling mount: If the camera is installed on a ceiling, the following display modes are available: “Original view”, “broad view”, “quad view”, “quad view with source”, “double view” and “triple view”.
User Manual SNC-3342 / SNC-6332 Table mount: If the camera is installed on a table, the following display modes are available: “Original view” and “double view”. Original view: Double view: PTZ control panel: The PTZ control panel is only displayed in “quad view”, “quad view with source” or “triple view” mode. Channel: Select the channel number. Step: Select the speed of the pan/tilt function (1-10). Pan/tilt arrows: Click to move the image. “+” and “-“: Click to zoom in/out.
User Manual SNC-3342 / SNC-6332 Action buttons: Full screen When activated, one channel is displayed in 4 different views. Speaker Click on this button to mute/activate the audio function. Note: This function is only open to a “user” who has been granted this privilege by the administrator. Talk The talk function allows the local site to talk to the remote site. Click on the button to switch it to on/off.
User Manual SNC-3342 / SNC-6332 2.3 Video Under the tab
User Manual SNC-3342 / SNC-6332 2.3.2 Advanced The video setting can be found under the path: Video > Advanced Stream 1 setting: RTSP path: This is the stream ID used for RTSP client streaming connection, such as VLC player (default: v00). Image format: Choose MJPEG or H.264. Resolution: 1600 x 1200, 800 x 600, 640 x 480. GOP: Choose the number of P-frame or B-frame between I-frame from 2 to 32. The lower the number, the higher the video quality you will get.
User Manual SNC-3342 / SNC-6332 2.4 Camera Under the tab , there are submenus including and . 2.4.
User Manual SNC-3342 / SNC-6332 Camera general setting: The following parameters can be adjusted in terms of image color/vision: Brightness: Luminance of image. Hue: Color hue can be modified. Saturation: Intensity of a specific color. Contrast: Difference in color and light between parts of an image. Sharpness: Sharpness of image. Audio setting: Audio enable: Turn on/off the audio. Encoder: Select “G711” or “AAC”. Input of listen pattern: Select the audio source: „Mic in“ or „Line in“.
User Manual SNC-3342 / SNC-6332 2.4.2 Advanced The camera setting can be found under the path: Camera > Advanced White balance: Adjustment to compensate for different environments in terms of light source. Users can choose from “auto”, “hold”, “sunny”, “cloudy” or “indoor” so that the camera can determine the correct color compensation due to different light environments. Please note that “hold” indicates that the parameter will apply default settings.
User Manual SNC-3342 / SNC-6332 Infrared (IR) cut filter: Auto: Default setting. Enable: Indicates that the filter is enabled to cut the IR light. Disable: Indicates that the filter is disabled and allows IR light (such as IR LED illuminator) to enter into the camera. Day / night threshold: The threshold to change from day to night mode. Default setting is 20 lux.
User Manual SNC-3342 / SNC-6332 2.5 Event Under the tab , there are submenus including: , , and . 2.5.1 Event server The event setting can be found under the path: Event > Event server. Add FTP: Name: Name the FTP server. Network address: Enter the network address of the FTP server. Upload path: Enter the desired upload path for events. Login information: Enter the user name and the password for the FTP server.
User Manual SNC-3342 / SNC-6332 Add HTTP: Name: Enter the name of the HTTP server. URL: Enter the network address of the HTTP server. User name / password: Enter the user name and the password for the HTTP server.
User Manual SNC-3342 / SNC-6332 2.5.2 Motion detection The motion detection setting can be found under the path: Event > Motion detection. To create a motion detection area, follow these steps: 1. Click on “Add” to set-up a detection area. 2. Give a name to this window area. 3. Select the trigger level and the sensitivity level for this detection window (0-100). 4. Select a color for the detection window by clicking on the color palette. 5.
User Manual SNC-3342 / SNC-6332 2.5.3 I/O ports The I/O port setting can be found under the path: Event > I/O ports. The relay inputs and outputs are photo-coupled (see chapter 1.4.2 for I/O terminal connectors’ pin assignment).
User Manual SNC-3342 / SNC-6332 2.5.4 Event configuration The event configuration setting can be found under the path: Event > Event configuration. To add an event trigger, follow these steps: 1. Click on “Add” and the setup panel will be expanded (as shown above). 2. Give a name to this event. 3. Set the time interval between the triggers. 4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”. 5. Triggered by: Select “motion detection” from the drop-down menu. 6.
User Manual SNC-3342 / SNC-6332 2.6 Schedule Under the tab , there are submenus including: and . 2.6.1 General The schedule setting can be found under the path: Schedule > General. Follow the steps below on how to set a schedule: 1. Check the “Enabled” box. 2. Select the video stream to be recorded. 3. Define the size of each sliced file (MB). 4.
User Manual SNC-3342 / SNC-6332 2.6.2 Storage The schedule setting can be found under the path: Schedule > Storage. Here, information on the storage status is displayed. A message is displayed when a recording is currently running. Note: The micro SD card must not be removed during the recording process.
User Manual SNC-3342 / SNC-6332 2.7 Network Under the tab , there are submenus including: , , and . 2.7.1 General The network setting can be found under the path: Network > General. On this page, the camera’s IP configuration is displayed including DHCP and static IP setting. “Enable ARP/ping” enables the camera to accept ARP or ping packets from the network. Disabling this option may provide extra security from intentional ping.
User Manual SNC-3342 / SNC-6332 2.7.2 Advanced NTP configuration: Users may configure a NTP (Network Time Protocol) server so that the camera’s system date and time can be synchronized with a specified time server or DHCP server. HTTP setting: Users may set the HTTP port that will be applied for web access. Default port = 80. RTSP setting: Users may set the RTSP (video) port for video data transmission. Default port = 554.
User Manual SNC-3342 / SNC-6332 2.7.3 SMTP (e-mail) Configure an e-mail host for the camera which will send e-mails on behalf of the configured e-mail account to a specified mail address (also see the chapter on “event configuration”). Fill-in the information about the mail server, server port, authentication information (if required) and the sender’s e-mail address.
User Manual SNC-3342 / SNC-6332 2.7.4 DDNS Check the box “DDNS enable” for dynamic DNS configuration. Host name: Assigned name that will be used for accessing the camera. User name / password: Account authentication for logging on to this service. Update time: Periodically, the camera updates its access information in the defined time. Response: The camera responds to the connection information (yes or no).
User Manual SNC-3342 / SNC-6332 2.8 System Under the tab , there are submenus including: , , , and . 2.8.1 Information The system setting can be found under the path: System > Information. On this page, a list of system and network configuration is displayed. These data are for information only and cannot be changed on this page.
User Manual SNC-3342 / SNC-6332 2.8.2 User Check the box “Enable anonymous login” if you don’t wish to have a user name displayed. 2.8.3 Date & time On this page, users may configure the system date and time as well as synchronization options with a PC and NTP server.
User Manual SNC-3342 / SNC-6332 2.8.4 Server maintenance This page provides some tools for system maintenance, such as firmware information and upgrades, backup and upload settings. 2.8.5 Log service Most system operations and/or processes will be kept in a log system. The link provides the review of these records.
Notes: Your local distributor: __________________________________________________________________________ www.santec-video.
