Manual

ManualsBrandsSantec ManualsAccessories for water1132LL

PAGE 01

MONARCH COLLECTION

PRESSURE BALANCED SHOWER WITH “LL” HANDLE

PART

DESCRIPTION

PART #

Complete Shower head *

Shower Arm *

Complete LL Handle for Shower *

P0285

P0286

* Please specify the finish when ordering the part.

KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

Shower Flange *

P0287

00YY-LL

PH29725

Shower Trim Plate *

PB-3800

Pressure Balanced Shower Valve

1132LL _ _-_ _

ITEM NUMBER

Allen Key for Set Screw

Summary of content (4 pages)

PAGE 1
ITEM NUMBER 1132LL _ _-_ _ MONARCH COLLECTION PRESSURE BALANCED SHOWER WITH “LL” HANDLE 3 2 1 5 H C 4 # 6 1 2 3 4 5 6 7 PART DESCRIPTION PART # Complete Shower head * P0285 Shower Arm * Shower Flange * P0286 P0287 Complete LL Handle for Shower * 00YY-LL Shower Trim Plate * PH29725 Pressure Balanced Shower Valve PB-3800 Allen Key for Set Screw * Please specify the finish when ordering the part.
PAGE 2
INSTALLATION INSTRUCTIONS 1132LL _ _ DESCRIPTION This product is precision engineered to provide satisfactory performance provided it is installed and operated in accordance with our recommendations contained in this manual. In order to fully enjoy the comfort, safety and the reliability of your pressure balancing valve, be certain to familiarize yourself with the contents of this manual.
PAGE 3
INSTALLATION INSTRUCTIONS 1132LL _ _ HANDLE BELL TRIM INSTALLATION - Place the shower plate on the all thread. - Screw the Handle Bell onto the All Thread and mark the position. Cut off the excess thread. - Insert the Handle onto the Stem. Measure the excess between the handle bell and the handle. Take off the handle and cut the excess stem. - Reinsert the handle onto the stem. Tighten the handle set screw firmly using the Allen Key.
PAGE 4
INSTALLATION INSTRUCTIONS 1132LL _ _ TEMPERATURE LIMIT STOP SET UP MECHANICAL STOP LIMIT STOP STOP POST -Santec Pressure Balanced Valve has a temperature limit stop ( please see Illustration C) which once set properly can provide a safe and comfortable hot water. Below is the limit stop installation procedure: - Remove all Handle trim parts, including the trim plate. - remove all internal parts up to the Limit Stop, do not remove the Mechanical Stop.