Install Instructions

4201 Lien Rd Madison, WI 53704
•
TOLL-FREE 1-800-533-7533
•
www.thermastor.com
•
[e-mail]
CONTINUED
TS-1050 3/19 Rev E
Step 4. Install In-Wall Dehumidifier to Surface Mount
Lift and support the dehumidier by the plastic drain pan
below the evaporator coil and place inside of the surface
mount. Two people are recommended for this step.
Route the drain hose and electrical wiring through
the corresponding knock out holes of the surface
mount and dehumidier to connect.
Locate the four slotted holes on the dehumidier.
Use Screw A to fasten the unit to the surface mount
through the slotted holes.
SCREW A