Install Instructions

Step 2. Attach Surface Mount to Wall
TS-1050 3/19 Rev E
4201 Lien Rd Madison, WI 53704
•
TOLL-FREE 1-800-533-7533
•
www.thermastor.com
•
[e-mail]
SCREW A or B
Locate studs inside the wall 16"
apart. Place the surface
mount on the wall and
ensure it is level.
Locate the four holes on
the surface mount and
fasten to the wall with the
appropriate screws based
on the stud type. Screw A
can be used for wood studs
and Screw B can be used for
metal studs.
CONTINUED
4038294
4037696
DRAIN HOSE
KNOCKOUTS
ELECTRICAL WIRING
KNOCKOUTS
BOTTOM VIEW
Punch the appropriate knock out holes for the drain hose and electrical wiring.
If using conduit, pass pipe through the knock out
hole before installing the dehumidier.
Install included plastic grommet for drain hose.
Step 3. Prepare Surface Mount for In-Wall Dehumidifier Installation
2.25 "