Install Instructions

Step 4: If attaching duct collar to both exhaust outlets, repeat steps 2-4 for the opposite side. If only using one
exhaust outlet, skip step 4 and proceed to step 5.
Step 5: Attach duct plate to side of dehumidifier using 6 screws. This will direct all exhaust air to the side with the
duct collar attached. If attaching collars to both exhaust outlets, skip step 5 and proceed to step 6.
Step 6: Attach ducting as needed.
Step 3: Attach duct collar to side of dehumidifier aligning screws with pre-drilled screw holes. Tighten screws.
4201 Lien Rd Madison, WI 53704
•
TOLL-FREE 1-800-533-7533
•
www.thermastor.com
•
[e-mail]
TS-777 4/18 Rev B