Install Instructions

Use screw and nut provided to install snap buttons.

This is done on both sides.

After snap buttons

installed

TS-632c 04/10

Return Duct Kit Assembly

Part No. 4030204

For small usage:

4201 Lien Rd., Madison, WI 53704

•

TOLL-FREE 1-800-533-7533

•

www.thermastor.com

•

sales@thermastor.com

OVER

PAGE 1
Return Duct Kit Assembly Part No. 4030204 Use screw and nut provided to install snap buttons. This is done on both sides. After snap buttons installed OVER 4201 Lien Rd., Madison, WI 53704 • TOLL-FREE 1-800-533-7533 • www.thermastor.com • sales@thermastor.
PAGE 2
Insert front panel tab into hole in the top of dehumidifier. Install duct collar to the front panel using the four Phillips screws provided. OVER 4201 Lien Rd., Madison, WI 53704 • TOLL-FREE 1-800-533-7533 • www.thermastor.com • sales@thermastor.
PAGE 3
Secure the duct/panel assembly to the dehumidifier by engaging the snap buttons into the mating holes on the duct/panel assembly. Parts List Phillips Screw, 6-20 x 3/4 - QTY 4 Screw, 4-40 x 1/4 - QTY 2 Nut, 4-40 - QTY 2 Snap Button - QTY 2 4201 Lien Rd., Madison, WI 53704 • TOLL-FREE 1-800-533-7533 • www.thermastor.com • sales@thermastor.