Install Instructions

Step 3: Using the self-drilling Hex screws, attach the duct plate with collar to the dehumidifier. Attach the top two screws
first. On the top, the duct plate with collar will attach where the screws were previously removed. On the bottom, the duct
plate will require new holes drilled into the unit. Do not over tighten the screws.
Step 4: Attach ducting as needed.
Note: 35" foam tape can be used to wrap around the duct collar to provide a seal between the duct collar and the duct
plate (optional).
4201 Lien Rd Madison, WI 53704
•
TOLL-FREE 1-800-533-7533
•
www.thermastor.com
•
[e-mail]
TS-711 1/18 Rev C