Install Instructions

Santa Fe Classic Dehumidifier
Ductable Inlet Mounting Detail
DUCTABLE
INLET
EXHAUST
COLLAR
TS-196C-0906
4201 Lien Rd. Phone [phone]
Madison, WI 53704 Toll-Free 1-800-533-7533
www.thermastor.com [e-mail]
Ductable Inlet Instructions
1. Remove the Filters from the unit.
2. Remove the ductable inlet from the box and
remove the release paper from the tape on the
inlet anges.
3. Center the inlet above the lter guides and
attach the inlet to the guides.
4. Replace the lters in the unit.
5. The six inch opening may be used as a fresh air
inlet from outside.
Exhaust Collar Mounting Instructions
6. Remove the exhaust collar from the box and
bend the tabs in.
7. Place the collar over the blower outlet and line
up the tabs with the holes in the cabinet.
8. Using (4) screws from the kit, attach the collar
to the unit.