OWNER’S MANUAL GUIDE D’UTILISATION FRANÇAIS ENGLISH 42/46” CLASS WIDE LED TV TÉLÉVISEUR DEL GRAND ÉCRAN CATÉGORIE 42/46 PO SLED4280 SLED4680 ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
How to attach the stand NOTE: • Unplug the AC cord from the AC outlet. • Ensure that unpacking and transfer of the unit is carried out by two or more people. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction.
Features ENGLISH • LED Backlight System - It realize thin profile, low power consumption, eco-friendly Hg-less design and high contrast picture. • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 Features............................................................7 Power source ....................................................7 Contents ...........................................................8 Parts and functions ..................................
Parts and functions ENGLISH Illustration is SLED4280 Right side Front HDMI1/DVI IN jack FOR SERVICE PERSONNEL USE ONLY Do NOT insert ANY USB device into this port. Use of this port by other than Service Personnel may void this products warranty.
Remote control 1 2 12 13 3 4 14 5 15 6 7 8 16 9 17 10 11 1. (POWER) Button - Used to turn the power on/off to the LCD TV. 2.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again. 3.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 4.– Button -This button is the “–” button used when selecting digital channels. 5.
Antenna connections Combination VHF/UHF Antenna (Single 75 ohm cable) Antenna Jack 75 ohm Coaxial Cable Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. ENGLISH If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17). Rear of the unit ENGLISH To connect an audio system Amplifier To VAR.
Connections to other equipment (continued) To connect the LCD TV to a HDMI or a DVI device to the unit The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
The Auto Setup menu appears the first time you turn on the TV, and assists you to specify the Air/Cable setting, and program your channels automatically. 3 4 IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 Set the Signal Type option to the appropriate position (see “Air/Cable selection” on page 18). Press the Direct Channel Selection (0-9, –) buttons to select the channel. (If you press only channel number, channel selection will be delayed for a few seconds.
DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear. 62-1 HDTV Moving Picture1 CH-1 Digital TV-MA Air Quick guide for menu operation Call menu and for example: Select Language. 1 2 Sleep Timer Off English No Program Information is available Press INPUT SELECT to select TV mode. Press MENU. The TV menu screen will appear.
Convenience functions Icon Picture Picture Setting DBC Selected Items Brightness / Contrast / Sharpness / Color / Tint Color Temperature Backlight*2 On / Off Picture Preference Picture Size Film Mode Sports Standard Movie Memory On/Off PC Setting Audio Hor Position / Ver Position Clock Phase Auto Adjust DNR On/Off Motion 120Hz On/Off Bass / Treble / Balance MTS Stereo / SAP / Mono Audio Language HDMI1 Audio Channel Lock Setup HDMI DVI On/Off Speakers Add / Delete DTV Signal Auto Ch Memory Ch L
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection 1 2 3 4 Select “Channel”, then press ▶ or ENTER.
Clear All Ch Label Channel Number Ch Label Label Clear All channels are deleted from the channel memory. 3 Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. Press ▲ or ▼ to select “Clear All”, then press ▶ or ENTER. 4 Adding Channel Add/Delete Clear All : Select Press ◀ or ▶ repeatedly until the character you want appears in the first space. Channel Number Ch Label Label Clear >> >> >> : Select : Select Checking the digital signal strength Press ▲ or ▼ to select “DTV Signal”.
Setting the V-Chip Genre: ALL D L S V FV An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. Movie Rating To register a password 1 2 Movie Rating G PG PG-13 R NC-17 X Select “Lock”, then press ▶ or ENTER.
6 7 Press ◀ or ▶ to set “V-Chip” to “On”. Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system. You also need “Update” procedure to update rating information. NOTE: • You can only download the additional V-Chip rating system when your TV is receiving a digital signal.
5 6 Press ▲ or ▼ to select “CC Advanced”, then press ▶ or ENTER. The CC Advanced menu will appear. Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting. CC Advanced Text Size Auto Text Type Auto Text Edge Auto Text Color Auto Text Opacity Auto Background Color Auto Background Opacity : Select Cinema Wide1 (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.
Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS TV does not operate. • • • • • Poor sound or no sound. • • • • Poor picture • or no picture. • • • Poor reception on some channels. • • • • Poor color or no color. • • • • Picture wobbles or drifts.
Specifications Weight: Dimensions: Operating temperature: Operating humidity: Type: Display method: Number of Pixels: Broadcasting system: Receiving channels: Tuner type: Inputs: Outputs: Speaker: Woofer: Audio output power: ACCESSORIES SLED4280 SLED4680 AC 120V 60Hz Operation: 135 W Operation: 152 W Standby: 0.3 W 15.8 kg (34.8 lbs) 18 kg (39.7 lbs) Width: 1013 mm (39-7/8 inches) Width: 1117 mm (43-15/16 inches) Height: 679.
limited WARRANTY 42/46” CLASS WIDE LED TV ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
