Operation Manual
56
To connect the TV/DVD to a PC (Personal Computer)
Before you connect this LCD Monitor to your PC, change the adjustment of your PC’s Resolution and Refresh
rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the
VGA connector PC MONITOR at the back of the TV/DVD. Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer
and to the AUDIO L and R connectors of the PC AUDIO (L/R) IN jacks of the TV/DVD.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
SVGA 800x600 56.3Hz
SVGA 800x600 60.3Hz
WVGA 848x480 60Hz
XGA 1024x768 60Hz
WXGA 1280x720 60Hz
WXGA 1024x768 60Hz
WXGA 1360x768 60Hz
To return to TV mode
Press INPUT SELECT again.
NOTES:
• The current signal source does not display
when you return to TV mode.
• The on-screen displays will have a different
appearance in PC mode than in TV mode.
• When you select WXGA mode, set the
WXGA INPUT to ON in the PC PICTURE
menu (see page 58).
Rear lower left of unit
Connections to other equipment (continued)
To connect an audio system or Subwoofer
This connection allows you to hear the TV sound through external speakers connected to an audio amplifier
or subwoofer.
To control the audio, turn on the TV/DVD and the stereo amplifier, and turn off the TV/DVD’s built-in speakers
(see “Turning off the built-in speakers” on page 31).
NOTE:
To hear sound when using an external audio amplifier, the volume of both the TV/DVD and the amplifier must
be set above 0 (zero).
For example, if the volume of the TV/DVD is set to 0, you will not be able to hear any sound, even if the
volume of the amplifier is at its highest level.
VGA cable (not supplied)
Audio cord (not supplied)
To PC AUDIO IN jack
Rear lower right of the unit
Stereo amplifier
To Audio(L/R) input
Audio cord (not supplied)Subwoofer
5V10101A[EN] P56-Back 9/30/05, 15:1156










