Operation Manual

56
1
Press SETUP/TV MENU in the stop mode or No Disc.
Press
or to select option, then press / or
ENTER.
2
Press or to select
“Night Mode”, then press
or ENTER.
3
Press or to select
“On” or “Off”, then press
ENTER.
On : Loud sound such as
explosion or similar is
toned down slightly
when play back. This
makes it suitable for when it is connected to a
stereo.
Off : It plays back at the recording level on the disk.
4
Press SETUP/TV MENU or RETURN to remove the Menu
screen.
Night Mode/Digital Out
NOTES:
• This function works only during
playback of Dolby Digital recorded
discs.
• The level of Dynamic Range Reduc-
tion may differ depending on DVD
video disc.
•Even if you select “Bitstream”, MPEG
audio will be output in PCM format.
Night Mode
Night Mode enables you to control the dynamic range so as
to achieve a suitable sound for your equipment.
1
Press SETUP/TV MENU in the stop mode or No Disc.
Press
or to select option, then press / or
ENTER.
2
Press or to select
“Digital Out”, then press
or ENTER.
3
Press or to select
“PCM”, “Bitstreem” or “Off”,
then press ENTER.
PCM: Change Dolby
Digital to PCM
for the output.
Select when
connected to a 2 channel digital stereo
amplifier.
Bitstream: Disc audio bitstream data will be output.
Off: There is no sound output from DIGITAL
AUDIO OUT jack.
4
Press SETUP/TV MENU or RETURN to remove the Menu
screen.
Digital Out
You can select the digital output sound format corresponding
to your system connection.
Night Mode : Off
Digital Out :PCM
Night Mode : Off
Digital Out :PCM
Digital Out
Off
On
Night Mode
: OffNight Mode
Digital Out
Off
PCM
Bitstream
50C0301A_EN_P56-61 4/27/07, 7:19 PM56