Operation Manual

40
Preparation/Status display of disc
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again.
To make the status display screen disappear, press DISPLAY
again.
Status display of disc
Press DISPLAY. The status display of the disc will appear on the
screen.
Preparation
Before DVD/CD operation, please make the following preparations.
1
2
3
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Each time you turn the unit ON, the TV/DVD starts from the
TV mode.
• When using an amplifier, switch on the amplifier.
Press TV/DVD to select DVD
mode.
The DVD startup screen will ap-
pear on the screen.
The following pages describe the
setup/operation in DVD mode.
DISC OPERATION
ELAPSED
TIME
TOTAL
TIME
CHAPTER
NO.
SUBTITLE LANGUAGE
A KIND OF AUDIOAUDIO LANGUAGE
ANGLE NO.
TITLE NO.
50C0301A_EN_P40-45 4/27/07, 7:19 PM40