Operation Manual

17
TV operation
If a channel with no broadcast is
selected, the sound will automati-
cally be muted.
It may take a few seconds for a
digital channel picture to appear on
screen after being selected.
To turn on the unit, press POWER.
Set the TV/CABLE menu
option to the appropriate
position (see page 19).
Adjust the volume level by pressing
VOL + or – . The volume level will
be indicated on the screen by white
bars. As the volume level increases,
so do the number of bars. If the
volume decreases, the number of
white bars also decreases.
1
2
3
4
Press the Direct Channel Selection
(0-9,–)
buttons to select the channel.
To select analog channels
When the TV/CABLE menu option is
in the TV position, all channels can be
instantly selected by using two
buttons.
(For example, to select channel 2, press “0”, then “2”. If you press
only “2”, channel selection will be delayed for a few seconds.)
For channels 10 and above, press the 2 digits in order.
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:
1-9: Press 0 twice, then 1-9 as needed.
Example, to select channel 2, press 002.
10-12: Press 0, then remaining 2 digits.
Example, to select channel 12, press 012.
13-99: Press the 2 digits in order.
Example, to select channel 36, press 36.
100-125: Press the 3 digits in order.
Example, to select channel 120, press 120.
To select digital channels
Press the channel number in order.
When “–” is contained in the channel number, Press the first 3
digits, then press “–/DISPLAY”, followed by the remaining 3 digits.
(Example, to select channel 015-001, press 015 – 001.)
• If a channel is selected with only audio content, “AUDIO ONLY”
will be displayed on the screen.
• If a channel is selected with a weak digital signal, “DIGITAL
CHANNEL SIGNAL STRENGTH IS LOW” will be displayed on
the screen.
If the digital channel has the same analog channel, you may be
able to watch the same channel with analog.
•
If a channel is selected to which you have not subscribed, “DIGITAL
CHANNEL IS ENCRIPTED” will be displayed on the screen.
VHF/UHF/CABLE CHANNELS
NOTES:
•
•
TV - VHF/UHF channels
CABLE - CABLE TV channels
TV CABLE
VHF
2-13
UHF
14-69
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
ANT
ABCD
CABLE
ANALOG
12
VOLUME 25
50C0301A_EN_P14-19 4/27/07, 7:17 PM17