OWNER’S MANUAL R 26” TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD260 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CABLE MODE SELECTION When shipped from the factory, the TV/CABLE menu option is set to the “CABLE” (Cable Television) mode. If not using CABLE, set this menu option to the “TV” position.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS (continued) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC-NATIONAL ELECTRICAL CODE S2898A POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that h
IMPORTANT SAFETY INSTRUCTIONS (continued) CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit. 10cm Notes when mounting the LCD TV/DVD on a wall • When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV/DVD and the wall.
Features LCD color TV With DVD/CD player Unique space saving design combines a 26” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents Playback operation Before using your unit IMPORTANT SAFETY INSTRUCTIONS ......... 3 SAFETY PRECAUTIONS ................................ 6 IMPORTANT NOTICE ..................................... 6 Features ........................................................... 7 Contents ........................................................... 8 Disc .................................................................. 9 Location of controls ........................................ 10 Remote control ...........
Disc Playable discs Disc type and logo mark content Audio + Video (moving pictures) DVD Video Audio CD-DA The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.
Location of controls Top VOLUME +/– buttons EJECT button SKIP button STOP button PLAY button CHANNEL ▲/▼ buttons MENU button INPUT button POWER button Front Remote sensor POWER indicator To display the menu screen. Press MENU button to display the menu screen. CHANNEL ▲/▼ buttons and VOLUME +/– buttons can be used to select the desired setting during the menu screen operations.
Location of controls (continued) Right side DISC slot Left side COAXIAL DIGITAL AUDIO OUT jack AV1 IN jacks RF (ANT) IN jack AV2 IN jacks COMPONENT IN jacks PC IN jack HDMI/PC AUDIO IN jack HDMI IN jack 11 50C0301A_EN_P06-13 11 4/27/07, 7:17 PM
Remote control Page POWER DISPLAY/– Power On/Off 16,17,40,41 Call TV information 18,22 Call DVD information 40 Input “–” for digital channels 17 TV/DVD Switch between TV/AV and DVD 16,40,41 5 (EJECT) Eject a disc 41,59 0-9 Direct channel selection of TV 17 Input setting 25,26,43,44,48 Enter a password 21~23,57~59 VOL +/– Adjust volume of TV 17,18 MUTE Switch off the sound 18,22 SLEEP Sleep timer 18 SETUP/TV MENU TV mode - Display menu of TV 16,19~26,30~39 DVD mode - Call up initial setup mode 45,53~58 DVD
Remote control (continued) Inserting Batteries 1 Open the battery compartment cover in the direction of the arrow. two “AAA” batteries, 2 Install 3 paying attention to the polarity Replace the compartment cover. diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the on-screen display language You can choose from three different languages (English, French and Spanish) for the on-screen displays. On-screen language selecion (step 5) will automatically appear on the screen when you press SETUP/MENU initially. Select the language you prefer first, then proceed with the other menu options. 1 Press POWER to turn on the unit. 2 Press TV/DVD to select the TV mode. 3 Press SETUP/TV MENU. The TV menu screen will appear. 4 Press or to select (SETUP) menu.
TV operation 1 To turn on the unit, press POWER. the volume level by pressing 2 Adjust VOL + or – . The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. the TV/CABLE menu 3 Set option to the appropriate VOLUME 25 TV - VHF/UHF channels CABLE - CABLE TV channels position (see page 19). the Direct Channel Selection 4 Press (0-9,–) buttons to select the channel.
TV operation (continued) CH / Press and release CH or . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 19 and 20 “Memorizing channels”. ANT ABCD CABLE ANALOG 12 DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear.
Memorizing channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. To use this TV/DVD with an antenna, set the TV/ CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. TV/CABLE selection 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.
Memorizing channels (continued) Automatic memory tuning SETUP/TV MENU in the TV mode. 1 Press The TV menu screen will appear. or to select 2 Press (SETUP) menu, then press ▲ or ▼ to select “AUTO CH MEMORY”. SETUP LANGUAGE ENGLISH TV/CABLE AUTO CH MEMORY ADD/DELETE CABLE :SELECT or . The unit will begin 3 Press memorizing all the channels available in your area.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV RATING” and “MOVIE RATING” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register password 1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear. 2 Press or to select (LOCKS) menu.
Setting the V-Chip (continued) To set the V-Chip 1 Press SETUP/TV MENU in the TV mode. Then press or (LOCKS) menu. LOCKS to select V- C H I P S E T N E W PA S S W O R D :SELECT :ADJUST 2 Press ▲ or ▼ to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. ▲ or ▼ to select “V-CHIP 3 Press SET”, then press or . The V- LOCKS PA S S WO R D [0-9] : SELECT LOCKS CHIP SET menu appears.
Setting the V-Chip (continued) To change the password SETUP/TV MENU in the TV mode. 1 Press The TV menu screen will appear. or to select 2 Press (LOCKS) menu. LOCKS V-CHIP SET NEW PASSWORD :SELECT :ADJUST 3 Press ▲ or ▼ to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. LOCKS PA S S WO R D [0-9] : SELECT ENTER : SET EXIT : END 4 Press ▲ or ▼ to select “NEW PASSWORD”, then press or .
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any four characters to identify a channel. To create channel labels 1 Select a channel you want to label. SETUP/TV MENU in the 2 Press TV mode, then press or to select (OPTION) menu. Press ▲ or ▼ to select “CH LABEL”, then press or . The CH LABEL menu will appear. OPTION CH LABEL VIDEO LABEL :SELECT :ADJUST 3 Press ▲ or ▼ to select “SET/ CLEAR”.
Selecting the video input source/ Labeling the video input source Selecting the video input source Press INPUT SELECT to view a signal from another device connected to your TV, such as a VCR or DVD player.You can select ANT, VIDEO1, VIDEO2, COMPONENT, HDMI or PC depending on which input jacks you used to connect your devices. SOURCE SELECTION 0 : ANT 1 : VIDEO1 2 : VIDEO2 3 : COMPONENT 4 : HDMI 5 : PC [0-5] : SELECT Pressing INPUT SELECT on the remote control displays the current signal source.
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes—NATURAL, CINEMA WIDE1, CINEMA WIDE2, CINEMA WIDE3, and FULL. Selecting the picture size 1 Press SETUP/TV MENU. Press or to select (SETUP) menu. Press ▲ or ▼ to select “PICTURE SIZE”. SETUP PICTURE SIZE PICTURE SCROLL CINEMA MODE ASPECT SIGNAL METER AUTO SHUT OFF FILM OFF OFF :SELECT Press or . The PICTURE 2 SIZE menu will appear.
Setting the picture size NOTES: • In HDMI or COMPONENT mode with a scanning rate of 720p or 1080i, only the CINEMA WIDE2 and FULL PICTURE SIZE feature are available. • The PICTURE SIZE feature is in the PC mode only for NATURAL or FULL. • In CINEMA WIDE2 picture size, some of the on screen display items may be positioned off the visible portion of the screen. You can use Picture Scroll, as explained on the right, to view off screen items.
Setting the picture scroll You can scroll the picture in CINEMA WIDE2 and CINEMA WIDE3 1 Press SETUP/TV MENU in CINEMA WIDE2 or CINEMA WIDE3 mode. Then press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE A U TO C H M E M O RY ADD/DELETE CABLE :SELECT :ADJUST 2 Press ▲ or ▼ to select “PICTURE SCROLL”. SETUP PICTURE SIZE PICTURE SCROLL CINEMA MODE ASPECT SIGNAL METER AUTO SHUT OFF FILM OFF OFF :SELECT :ADJUST 3 Press or to display the SCROLL ADJUSTMENT mode.
Selecting the cinema mode/Using the aspect feature Selecting the cinema mode A smoother motion may be obtained by setting the Picture Mode to Film when you view a DVD. SETUP/TV MENU in the 1 Press TV mode, then press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE AUTO CH MEMORY ADD/DELETE CABLE :SELECT ▲ or ▼ to select CINEMA 2 Press MODE, then press or to select “FILM”.
Adjusting the picture preference/Picture control adjustment You can select four picture modes—SPORTS, STANDARD, MOVIE, and MEMORY—as described in the following table: Adjusting the picture preference 1 Press SETUP/TV MENU in the TV mode, then press or to select (PICTURE) menu. PICTURE PICTURE PREFERENCE SPORTS BRIGHTNESS CONTRAST COLOR TINT SHARPNESS 25 50 25 0 25 :SELECT :ADJUST ▲ or ▼ to select 2 Press “PICTURE PREFERENCE”.
Selecting the color temperature/Adjusting the back lighting feature/ Resetting your picture adjustments Selecting the color temperature Change the picture quality by selecting from three preset color temperatures—COOL, MEDIUM, and WARM: 1 Press SETUP/TV MENU in the TV mode, then press select or to (PICTURE) menu. ▲ or ▼ to select “COLOR 2 Press TEMPERATURE”. Press or you prefer.
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.
CC advanced Closed Captions are factory preset however you can adjust them individually as follows: This feature is designed to customize Digital Captions only. 1 Press SETUP/TV MENU. The menu screen will appear. Press or to select 2 (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE A U TO C H M E M O RY ADD/DELETE CABLE :SELECT :ADJUST ▲ or ▼ to select “CC 3 Press ADVANCED”, then press or . The CC ADVANCED menu will appear.
Selecting Stereo/Second Audio Program (SAP)/ Sound control adjustment The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. When the TV receives a stereo or SAP broadcast, the word “STEREO” or “SAP” displays onscreen every time you turn the TV on, change the channel, or press DISPLAY.
Selecting the HDMI audio input source/ Selecting the audio language Selecting the HDMI audio input source When you use HDMI AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”. 1 Press SETUP/TV MENU in the TV 2 mode. Then press or (AUDIO) menu. to select AUDIO Press ▲ or ▼ to select “HDMI”, then press or to select “HDMI” or “DVI”.
Selecting the digital output/Resetting your audio adjustments Selecting the digital output You can choose the format of the digital audio output signal. SETUP/TV MENU, then 1 Press press or to select (AUDIO) menu. AUDIO MTS BASS TREBLE BALANCE SURROUND :SELECT STEREO 25 25 0 OFF :ADJUST ▲ or ▼ to select “DIGITAL 2 Press OUTPUT”, then press or to select “PCM” or “DOLBY DIGITAL”.
Checking the Digital-signal strength/Setting the auto shut off Checking the Digital-signal strength This unit will allow you to view the digital signal meter for digital channels. 1 Press SETUP/TV MENU, then press or to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE AUTO CH MEMORY ADD/DELETE CABLE :SELECT :ADJUST 2 Press ▲ or ▼ to select “SIGNAL METER”.
Picture/Audio control adjustment in the PC mode PC Monitor Menu There are a number of picture and audio settings you can adjust to optimize the performance of the TV in PC mode. Press INPUT SELECT repeatedly to select PC mode. Press SETUP/TV MENU. The PC Monitor Menu will appear.
Picture/Audio control adjustment in the PC mode Resetting your picture/audio adjustment in the PC mode The RESET function returns your picture/audio adjustment to the following factory settings: PICTURE menu BRIGHTNESS ........... center (25) CONTRAST ................. max (50) RED ........................... center (25) GREEN ..................... center (25) BLUE ......................... center (25) AUDIO menu BASS ...................... center (25) TREBLE ................. center (25) BALANCE .........
Preparation/Status display of disc The following pages describe the setup/operation in DVD mode. Preparation Before DVD/CD operation, please make the following preparations. the AC cord plug into a standard 120V 60Hz polarized 1 Insert AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: When connecting to other equipment, unplug the unit from the AC outlet. POWER on the unit or on the remote control to turn on 2 Press the unit.
Playback procedure 1 Press TV/DVD to select DVD mode. the disc in the disc 2 Place slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. 5” the screen, “5 3 On changes to “Reading” and then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, , , , or press ENTER to operate a menu feature.
Special playback NOTE: There may be a slight delay between when you press the button and the function activating. Fast Forward Playback Press SEARCH during normal playback. Each press of SEARCH search (CD: (x 2), (x 2), will increase the speed of the (x 4), (x 8), (x 4), (x 8), (x 15). (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH during normal playback. will increase the speed of the Each press of SEARCH search (x 2), (x 4), (x 8), (x 15).
MP3/WMA/JPEG and Audio CD playback This player can play back MP3/WMA/JPEGdata which has been recorded on CD-R or CD-RW. To produce MP3/WMA/JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/JPEG-encoding software (not supplied). The Apple-HFS-System cannot be played. MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback • MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters, “mp3”, “wma”, “jpg”.
MP3/WMA/JPEG and Audio CD playback 1 In the file browser, press / to select the desired JPEG file. To display a thumbnail list, press DVD MENU. Press / / / to select the desired file. (To return to the file browser, press TOP MENU.) (continued) /Picture-01.
Setting the JPEG interval You can continuously play back all JPEG files automatically. 1 Press SETUP/TV MENU in the stop mode. or to select option, then press Press ENTER. 2 Press or to select “JPEG Interval”, then press or ENTER. or to select your 3 Press desired time, then press ENTER. Off: Plays back one file at a time.
Program playback (CD) You can arrange the order of tracks on the disc. file browser, press / / 1 In the / to select “Edit Mode”, then press ENTER. MP3 3 When “Edit Mode” is black color, you can mark the files which you want to add into Program list. Press / / / to select the 2 file you want to add into the program list. WMA 2 Press ENTER. Selected file was marked. Repeat this procedure to select the other files. / / 3 ToPress Program”.
Repeat playback (CD)/Random playback (CD) Repeat playback file browser, press / / 1 In the / to select “Repeat” during stop mode. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 Select Files Repeat :Off Mode :Off JPEG Preview WMA-3 ENTER repeatedly to select 2 Press “Track” or “All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 Select Files Repeat :Track Mode :Off JPEG Preview WMA-3 PLAY. 3 Press The unit automatically starts repeat playback after finishing the current track.
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during 1 Press playback. 1 The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM magnification 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). Press / / / to view a different part of the frame. 2 You may move the frame from the center position UP, DOWN, LEFT or RIGHT.
Repeat playback Title, Chapter, Track Playback 1 Press PLAY MODE during playback or stop mode. ENTER repeatedly to select 2 Press “Chapter” or “Title”. Play Mode Repeat : Off The unit automatically starts repeat playback after finishing the current title or chapter. • If you set the repeat mode during stop mode, press PLAY to start Repeat playback. 3 Press PLAY MODE again to make the screen disappear. • Press PLAY to start Repeat playback. • To resume normal playback, select Repeat “Off” in step 2.
Marking desired scenes The TV/DVD stores the points that you want to watch again. You can resume playback from that scene. Marking the Scenes MARKER during 1 Press playback. the blank Marker 2 Select using or , then press ENTER at the desired scene. Marker 1 Marker 2 Marker 3 Marker 1 Marker 2 Marker 3 00 27 54 • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. 3 Press MARKER to remove this display. Returning to the Scenes MARKER during 1 Press playback or stop mode.
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. AUDIO during 1 Press playback. 1/2 Eng Dolby Digital The current soundtrack language will appear. AUDIO repeatedly 2 Press until the desired language 2/2 Fre Dolby Digital is selected. The on-screen display will disappear after a few seconds. Subtitles Turning the subtitles on and off When playing back a disc recorded with subtitles, you can turn the subtitles on or off.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facility, you can change the view angle. 1 Press ANGLE during 1/2 playback. The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. TOP MENU during playback. 1 Press Title menu appears on the screen.
Setting the language You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. SETUP/TV MENU in the stop mode. 1 Press Press or to select option, then press / or ENTER. or to select 2 Press desired option, then press or ENTER. or to select your 3 Press desired language (e.g. English).
Setting the aspect ratio of TV screen/Setting on screen display Setting the aspect ratio of TV screen You can select the aspect ratio of the picture. SETUP/TV MENU in the stop mode or No Disc. 1 Press or to select option, then press / or Press ENTER. Press or to select “TV 2 Screen”, then press or ENTER. Press or to select your 3 desired screen type, then press ENTER.
Setting the picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Setting the picture mode SETUP/TV MENU in the stop mode or No Disc. 1 Press or to select option, then press / or Press ENTER. or to select “Picture 2 Press or Mode”, then press ENTER.
Night Mode/Digital Out Night Mode Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment. SETUP/TV MENU in the stop mode or No Disc. 1 Press or to select option, then press / or Press ENTER. or to select 2 Press “Night Mode”, then press or ENTER. Press or to select 3 “On” or “Off”, then press ENTER. Night Mode : Off Digital Out :PCM Night Mode Off Digital Out On On : Loud sound such as explosion or similar is toned down slightly when play back.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 1 Press SETUP/TV MENU in the stop mode or No Disc. Press or ENTER. to select option. Then press or to select 2 Press or “Parental”, then press ENTER. “Enter Password” screen will appear. “0000” using Number 3 Press buttons (0-9). (Please note, this pre-setting password of this unit). Then press ENTER. The parental level list will appear.
Setting the new password 1 Press SETUP/TV MENU in the stop mode or No Disc. Press or ENTER. to select option. Then press or to select 2 Press “Password”, then press or / Parental : Off Password : Change ENTER. “Enter Current Password” screen will appear. Number buttons (0-9) 3 Press to enter the password you Parental : Off Password : Change have stored. Enter Current Password • If you input a wrong number, press CANCEL. Then press ENTER.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. 1 Load a DVD disc (see page 41). the DVD disc has been designed to temporarily cancel the 2 IfRating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with ENTER key, password input screen will then appear.
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 53).
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Connections to other equipment (continued) To connect the TV/DVD to a camcorder, or a TV Game To playback from a camcorder, connect the camcorder to the unit as shown. This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. TV/DVD does not operate. 13 TV BROADCAST RECEPTION Poor sound or no sound.
Problems and troubleshooting SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 41 9 9 No picture. • TV/DVD selector is not set correctly. 40 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 42 62 Picture is distorted during CUE or REVIEW.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Viewing angle: Tuner type: Receiving channels: Input: Digital audio out: Component video input: HDMI input: PC Monitor input: Antenna input: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES: AC 120V 60Hz Operation: 130W Stand by: 1W 12.7 kg (28.
R limited WARRANTY 26” TFT LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 90 days from date of original purchase in the United States.
